[Asterisk-Users] Problem calling a ZAP channel with svn 10842

[John covici]

I am using asterisk CVS 10842 and a TDM 400p withanfxs and an fxo
module and when I dial the fxs channel it rings for a second and then
says no answer after 20 seconds.  I also have the latest Zaptel drivers.

Here is a log snippet.
Feb 25 00:53:11 VERBOSE[2015] logger.c:     -- Executing
Dial("SIP/15712523171-09c1", "ZAP/1|20|trwW") in new stack
Feb 25 00:53:11 VERBOSE[2015] logger.c:     -- Called 1
Feb 25 00:53:11 DEBUG[2015] channel.c: Driver for channel
'SIP/15712523171-09c1' does not support indication 3, emulating it
Feb 25 00:53:11 DEBUG[2015] channel.c: Scheduling timer at 160 sample
intervals
Feb 25 00:53:11 VERBOSE[2015] logger.c:     -- Zap/1-1 is ringing
Feb 25 00:53:11 DEBUG[2015] channel.c: Generator got voice, switching
to phase locked mode
Feb 25 00:53:11 DEBUG[2015] channel.c: Scheduling timer at 0 sample
intervals
Feb 25 00:53:11 VERBOSE[2015] logger.c:     -- Nobody picked up in
20000 ms

Any assistance would be appreciated.

-- 
Your life is like a penny.  You're going to lose it.  The question is:
How do
you spend it?

         John Covici
         covici at ccs.covici.com