[Asterisk-Users] Polycom IP601 Question

Kevin Smith kevin.smith at mercury.net
Thu Feb 23 14:04:17 MST 2006


Hey guys,

Thanks for the suggestions. I did find the problem. Looking in the sip 
debug, I was getting a 407 error, corrected that, then was getting a 
404. Which lead me to look at my context and bam...typo, I had conext 
instead of context. Corrected that and all is well. Thanks again.

Kevin

C F wrote:
> What does the dialplan for the Polyocm 601 (the one the phone uses,
> not Asterisk) look like?
> You can see if it's a polycom or asterisk thing, by enabling sip
> debug, and watch what is coming in from the Polycom. if nothing is
> coming then it's the Polycom doing it.
>
> On 2/23/06, Kevin Smith <kevin.smith at mercury.net> wrote:
>   
>> Hey everyone, I haven't seen an issue quite like mine, so I am hoping
>> anyone who used the Polycom 601's may have an idea.
>>
>> We are going to be switching our office over to Asterisk. All the phones
>> are going to be 601's, I am going to set up a boot server, but for now I
>> am just going to test everything on one phone. My question is I have the
>> phone registered in Asterisk (phone icon on the polycom is black), but I
>> cannot make any calls. I tried to dial the extension shown in the
>> extensions.conf file and I just get a busy signal. However, if I plug in
>> an old budgetone 100 with the same settings, it works just fine. Any ideas?
>>
>> Also, when setting up a boot sever, the phone updates the log entries
>> and there is a cfg file for the mac address of the phone, but during a
>> reboot it cannot connect to the bootserver. Do I need to have the
>> sip.ld, etc, files up there for it to work properly?
>>
>> Any suggestions would be greatly appreciated.
>>
>> Here is the sip.conf file
>>
>> [test]
>> type=friend
>> secret=blahpoly
>> insecure=yes
>> host=dynamic
>> qualify=500
>> nat=no
>> mailbox=testmailbox
>> callerid=Yourname <test>
>> conext=local
>> disallow=all
>> allow=ulaw
>> progressinband=no
>>
>> here is the local section of the dial plan.
>> exten => 850,1,Goto(Mercury-Network,850,1)
>> exten => 888,1,VoiceMailMain(@Mercury-Network-Emp)
>>
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> Asterisk-Users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>     
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>   



More information about the asterisk-users mailing list