[Asterisk-Users] isdn problem

[Piotr Chytla]

Hi 

I have beronet BN8S0 isdn card in my asterisk and , card is working
fine, but when I try to dial to special number 118913 ( telephone number 
information) from polish telecom TPSA, I always geting timeout .

Bellow is isdn signaling dump :

 --> * CallGrp: PickupGrp:
 --> rxgain:0 txgain:0
 --> * dad:118913 tech:mISDN/2-u25 ctx:default
 --> * Setting Context to from-tpnet
 --> TON: Unknown
 --> TON: Unknown
 --> PRES: Allowed (0x0)
 --> SCREEN: Unscreened (0x0)
 --> * adding2newbc ext 118913
 --> * adding2newbc callerid 717201234
I SEND:SETUP oad:717201234 dad:118913 port:2
 --> mode:TE cause:16 ocause:16 rad:
 --> info_dad: onumplan:0 dnumplan:0 rnumplan:0
 --> channel:0 caps:Speech pi:0 keypad:
 --> urate:0 rate:0 mode:0 user1:0
 --> pid:0 addr:51400102 l3id:11000c
--> new_l3id 11000e
 --> * SEND: State Dialing pid:43
I IND :SETUP_ACKNOWLEDGE oad:717201234 dad:118913 port:2
 --> mode:TE cause:16 ocause:16 rad:
 --> info_dad: onumplan:0 dnumplan:0 rnumplan:0
 --> channel:1 caps:Speech pi:0 keypad:
 --> urate:0 rate:0 mode:0 user1:0
 --> pid:43 addr:51400102 l3id:11000e
I IND :TIMEOUT oad:717201234 dad:118913 port:2
 --> mode:TE cause:16 ocause:16 rad:
 --> info_dad: onumplan:0 dnumplan:0 rnumplan:0
 --> channel:1 caps:Speech pi:0 keypad:
 --> urate:0 rate:0 mode:0 user1:0
 --> pid:43 addr:51400102 l3id:11000e
I IND :RELEASE oad:717201234 dad:118913 port:2
 --> mode:TE cause:-1 ocause:16 rad:
 --> info_dad: onumplan:0 dnumplan:0 rnumplan:0
 --> channel:1 caps:Speech pi:0 keypad:
 --> urate:0 rate:0 mode:0 user1:0
 --> pid:43 addr:51400102 l3id:11000e
Idx:0 stack->cchan:0 Chan:1
Idx:1 stack->cchan:0 Chan:2
Idx:0 stack->cchan:0 Chan:1
Idx:1 stack->cchan:0 Chan:2
I IND :CLEAN_UP oad: dad: port:2
 --> mode:TE cause:16 ocause:16 rad:
 --> info_dad: onumplan:0 dnumplan:0 rnumplan:0
 --> channel:0 caps:Speech pi:0 keypad:
 --> urate:0 rate:0 mode:0 user1:0
 --> pid:0 addr:51400102 l3id:11000e
Trying to Release bc with l3id: 11000e
* RELEASING CHANNEL pid:0 ctx:from-tpnet dad:118913 oad:118913 state: (null)
 --> * State Down
 --> Setting AST State to down
* --> In State Dialin
* --> Queue Hangup

What I've tried to do:

  - set correct CallerID 
  - use Dial app with option 's', 'n:h'  , 'h'

Without luck, but when I connect analog telephone to NT R-interface , 
after dialing number I have connection.

Other thing is there is second similar number 118912 (abroad telephone 
number information ) , and I call to this number without problems.


/pch

-- 
Dyslexia bug unpatched since 1977 ...
exploit has been leaked to the underground.