[Asterisk-Users] Problema calling from elesign h.323 to iax

[Guillermo Salas M]

On Wed, 2006-02-22 at 21:44 +0200, yusuf at ecntelecoms.com wrote:
> > Hi, i'm using an elesign voip gateway esc1700 to call to one iax
> > sofphone (idefisk) and sip device (sipura spa-2002), the trouble es when
> > I make the call using the esc1700 the communication is dropped, this is
> > the log portion:
> >
> > Feb 22 14:27:11 VERBOSE[22069] logger.c:     -- Call accepted by
> > 200.93.220.21 (format ulaw)
> > Feb 22 14:27:11 VERBOSE[22069] logger.c:     -- Format for call is ulaw
> > Feb 22 14:27:11 VERBOSE[22106] logger.c:     -- IAX2/911-12 is ringing
> > Feb 22 14:27:17 VERBOSE[22106] logger.c:     -- IAX2/911-12 answered
> > OH323/1700_MARKET at 201.218.10.58-f4b26fe9
> > Feb 22 14:27:18 VERBOSE[22105] logger.c:        > H.323 call 'ip
> > $201.218.10.58:30010/18733-f4b26fe9', exception CTRL_ERROR (Capability
> > Exchange [Rejected]).
> > Feb 22 14:27:18 VERBOSE[22073] logger.c:     -- H.323 call 'ip
> > $201.218.10.58:30010/18733-f4b26fe9' cleared, reason 24 (Call ended with
> > Q.931 cause [31 - Normal, unspecified])
> > Feb 22 14:27:18 VERBOSE[22106] logger.c:     -- Hungup 'IAX2/911-12'
> > Feb 22 14:27:18 VERBOSE[22106] logger.c:   == Spawn extension
> > (macro-dial, s, 10) exited non-zero on
> > 'OH323/1700_MARKET at 201.218.10.58-f4b26fe9' in macro 'dial'
> > Feb 22 14:27:18 VERBOSE[22106] logger.c:   == Spawn extension
> > (macro-dial, s, 10) exited non-zero on
> > 'OH323/1700_MARKET at 201.218.10.58-f4b26fe9' in macro 'exten-vm'
> > Feb 22 14:27:18 VERBOSE[22106] logger.c:   == Spawn extension
> > (macro-dial, s, 10) exited non-zero on
> > 'OH323/1700_MARKET at 201.218.10.58-f4b26fe9'
> > Feb 22 14:27:18 VERBOSE[22106] logger.c:     -- Hungup
> > 'OH323/1700_MARKET at 201.218.10.58-f4b26fe9'
> >
> > Any ideas?
> >
> >
> > I'm using the channel_oh323.so module. I've another h.323 device tha
> > works without problems.
> >
> > Best regards,
> >
> have you tried playing around with
> 
> fastStart
> ;
> h245Tunnelling
> ;
> h245inSetup
> 


It's working now :)


;
; Enable fast start (yes,no).
;
fastStart=no
;
; Enable H.245 tunnelling (yes,no).
;
h245Tunnelling=no
;
; Enable early H.245 messages in call SETUP message.
;
h245inSetup=no



Thank you very much for the help ;)


> it helps to change and see what happens
> 
> 
-- 
Guillermo Salas M.
Telconet S.A. Manta
Calle 15 y Av. 24 Esq.
Phone : 593 5 262 8071
Mobile: 593 9 985 5138
SIP   : 103 at sip.manta.telconet.net
e-mail: gsalas at manta.telconet.net
www   : http://www.telconet.net
        http://www.telcocarrier.net

Linux User: 255902
Soporte en Linea en http://www.manta.telconet.net

Please avoid sending me Word or PowerPoint attachments.
See http://www.fsf.org/philosophy/no-word-attachments.html