[Asterisk-Users] How do I install speex for asterisk?

[Mark Phillips]

If you did a make install with speex then everythings where it should be.

Just do a make; make clean with asterisk and all will be fine.

Mark, G7LTT/KC2ENI
Randolph, NJ
http://www.g7ltt.com


Jesus E Zepeda wrote:
> Huuu! I never expected you had to recompile asterisk to add a codec. But
> if that is what it takes, we'll do it.
> 
> I noticed that asterisk makes reference to some speex.c in the makefile
> file. In some of those references I saw the actual speex.c file in the
> paths specified. A couple of them missing by the way. That could be why
> speex was never taken by asterisk.
> 
> Mike, does speex have to be copied to a specific directory, then
> compiled and installed before re-compiling and re-installing asterisk?
> 
> I appreciate you took your time to reply. Regards,
> 
> Jesus
> 
> -----Original Message-----
> From: Mike Pollitt [mailto:mike at limeboy.com] 
> Sent: Thursday, February 16, 2006 15:22
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: RE: [Asterisk-Users] How do I install speex for asterisk?
> 
> 
> You need to recompile Asterisk itself after installing Speex. Do a make
> clean, make, make install. I usually stop asterisk before that last
> step, by the way!
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jesus E
> Zepeda
> Sent: Friday, 17 February 2006 5:58 AM
> To: Asterisk User List
> Subject: [Asterisk-Users] How do I install speex for asterisk?
> 
> Hi, everybody:
> 
> I enabled speex in my asterisk box (iax.conf), but no phone call went
> throug. At the asterisk console, I used the "show modules" command and
> it did not show the speex codec in the list.
> 
> So, I downloaded the speex codec from speex.org, v1.0.5, compiled and
> installed in my asterisk machine.
> 
> What I still don't know is: what do I need to do from the asterisk side
> to make it available?
> 
> I just downloaded it to a directory, compiled and installed thinking
> that by doing a restart to asterisk it would some how know where to load
> it from.
> 
> Any hints are appreciated
> 
> Regards,
> 
> Jesus E. Zepeda
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>