[Asterisk-Users] problem with outgoing calls Unable tocreatechannel of type 'ZAP' (cause 34 - Circuit/channel congestion)

[nik600]

On 2/13/06, nik600 <nik600 at gmail.com> wrote:
> On 2/13/06, Michael Collins <mcollins at fcnetwork.biz> wrote:
> > When Asterisk first starts up, it will attempt to "bring up" the B
> > channels on any PRI circuits.  If you are using A at H then you can log on
> > to the Asterisk CLI (asterisk -r) and then do "stop now" to stop
> > asterisk.  Start up Asterisk again by typing asterisk -cvvv at the Linux
> > command line.  You should see a bunch of messages on the terminal and
> > then you'll get the Asterisk CLI prompt.  A few moments later you should
> > see some more messages saying something like "B channel 1/1 successfully
> > started on span 0" and then "B channel 1/2 successfully started..."  I
> > don't have my system active at the moment but when I do I'll email you a
> > screen capture of the messages I see on my PRI.
> >
>
> i get:
> *CLI>   == Primary D-Channel on span 1 up
>
> at the moment i've got only one span connected...il the message correct?
>
Description                              Alarms     IRQ        bpviol 
   CRC4
T2XXP (PCI) Card 0 Span 1                NOP        0          0      
   0
T2XXP (PCI) Card 0 Span 2                RED/NOP    0          0      
   0
ZTDUMMY/1 1                              UNCONFIGUR 0          0          0