[Asterisk-Users] Call Waiting x100P and Cisco IP Phone

[kevin ling]

Hi,

In AAH, you can setup the "Incoming Calls" to ring your extension. Or to
ring extensions in a ring group. 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Chuck Smith
Sent: Friday, February 03, 2006 6:53 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] Call Waiting x100P and Cisco IP Phone

OK I have looked everywhere and I can't get a clear understanding on how to
do this. If I have an x100P card connected to my home phone line and I am
receiving calls on my Cisco 7940 IP phone with a SIP firmware loaded on it.
How can I send the hook flash to the x100P card to switch to the call coming
in from the PSTN? I am using Asterisk at Home 2.4. I can hear the call waiting
tone coming over the line but the phone doesn't recognize it.



Thanks



_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users