[Asterisk-Users] POTS lines vs. using T1 to connect phoneservices?? HELP

[Kevin Steil]

Thanks...just need to see what the cost is...compared to getting 6
lines..

-----Original Message-----
From: Tom Vile [mailto:tvile at baldwintechsolutions.com] 
Sent: Thursday, February 02, 2006 9:58 AM
To: Asterisk User List
Subject: Re: [Asterisk-Users] POTS lines vs. using T1 to connect
phoneservices?? HELP

A fractional T1 is what I would suggest and it is easy to setup and
configure.  You should only need to plug in the T1 line directly into
the T1 Card on the server.  The provider will supply the equipment to
terminate the line on your premises.

On 2/2/06, Kevin Steil <kevin at steiltech.com> wrote:
>         Need help...I need to install a card to terminate 7 lines...I
> have not order the phone lines yet...I can either do analog lines 1FBs
> or order a fractional T1...any suggestions on what hardware would be
> easier to install and configure...also if I went with a T1...do I need
> an external CSU/DSU or anything or does it just plug into the T1
> card...thanks..
>
> Kevin J. Steil
> Steil Technologies
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


--
Tom Vile
Baldwin Technology Solutions, Inc
Consulting - Web Design - VoIP Telephony
www.baldwintechsolutions.com
Phone: 518-631-2855 x205
Fax:     518-631-2856