[Asterisk-Users] Re: CallerID Problem

[Gary Richardson]

Hmm, that's annoying.

If I Set(CALLERID(num)=) (ie, I unset it), the callerid is set to the
default on the router and everything works as expected..

Thanks guys :)

On 2/1/06, jan.sarin at securia.se <jan.sarin at securia.se> wrote:
> This is what i found on Cisco's site:
>
> "Symptoms: Media negotiation fails for SIP calls and the terminating gateway replies with a "488" message to an Invite message.
>
> Conditions: This symptom is observed on a Cisco platform when the terminating gateway is configured with the G279B (annex B) codec and when the Session Description Protocol (SDP) for the incoming Invite message does not have any FMTP attribute line, which means that the default value, that is, the G279B (annex B) codec, is used.
>
> Workaround: There is no workaround."
>
> Regards,
> Jan
>
> -----Ursprungligt meddelande-----
> Från: asterisk-users-bounces at lists.digium.com genom Gary Richardson
> Skickat: on 2006-02-01 21:45
> Till: Asterisk Users Mailing List - Non-Commercial Discussion
> Ämne: Re: [Asterisk-Users] Re: CallerID Problem
>
> No, I'm not including the <> -- I was trying to show that it was
> something that I removed from my example..
>
> Thanks.
>
> On 2/1/06, Bromont Quebec <Bromont at shaw.ca> wrote:
> > Are you actually putting the < > in there?
> >
> > try:
> >
> > exten => _9.,1,Set(CALLERID(number)=MAINNUMBER)
> >
> > Hey,
> >
> > I'm using a Cisco 2811 to make calls out to a PRI. My asterisk box
> > connects to it using SIP. The asterisk version is 1.2.0.
> >
> > In my sip.conf, I set callerid="First Last" <exten>
> >
> > When I make a an outbound call with the following macro:
> >
> > exten => _9.,1,Dial(SIP/${EXTEN}@<ROUTER>,,w)
> > exten => _9.,2,Congestion()
> >
> > The caller id is set to the extension that's defined in sip.conf.
> >
> > If I try something like:
> >
> > exten => _9.,1,Set(CALLERID(number)=<MAINNUMBER>)
> > exten => _9.,2,Dial(SIP/${EXTEN}@<ROUTER>,,w)
> > exten => _9.,3,Congestion()
> >
> > I get the following error:
> >
> >     -- Got SIP response 488 "Not Acceptable Media" back from <ROUTER>
> >
> > It all works fine if I don't set the caller id.. Any ideas on why this
> > may be happening?
> >
> > Thanks.
> >
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>