[asterisk-users] TE110P with Qsig

Josué Conti josueconti at gmail.com
Fri Dec 29 19:49:00 MST 2006 

Hi Francoise, thanks will be this attention. I verified to jumper of the
TE110P, That´s closed (indicating link E1), in the tests without crc4, the
error is the same, I of not intervene with nothing. Stranger is that I
obtain you effect normally called and received too.
In the ztcfg - vv to appear the 30 channels in isdn.

Thank´s in advance

Best Regards

Josué


2006/12/29, f6hqz-m at hamwlan.net <f6hqz-m at hamwlan.net>:
>
> Hi Josué,
>
> Have you checked the strap on the TE110P board ?
> You must have it on the E1 position, not T1 (open ?, I don't remember at
> this hour, sorry).
> Check also without crc4.
> And recheck ztcfg -vvv.
>
> Best Regards,
> Francois BERGERET,
> France.
>
> -----Message d'origine-----
> De : asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] De la part de Josué Conti
> Envoyé : vendredi 29 décembre 2006 23:27
> À : Asterisk Users Mailing List - Non-Commercial Discussion
> Objet : Re: [asterisk-users] TE110P with Qsig
>
>
> Hi Matthew thank's will be attention.
> I believe that the configurations are correct, I changed of server, one
> another hardware and the problem remains the same. :(
> Changing of protocol, for euroisdn the problem remains.
>
> Stranger, does not find?
>
> Best Regards
>
> Josue
>
> zaptel.conf
> span=1,1,0,ccs,hdb3,crc4
> bchan=1-15
> dchan=16
> bchan=17-31
>
> loadzone=us
> defaultzone=us
>
> zapata.conf
> [trunkgroups]
>
> [channels]
> language=us
> context=default
> switchtype=qsig
> nsf=none
> pridialplan=unknown
> prilocaldialplan=unknown
> facilityenable = yes
> signalling=pri_cpe
> ;rxwink=300
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> restrictcid=no
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> immediate=no
> callerid=asreceived
> musiconhold=default
> group=1
> channel=>1-15
> channel=>17-31
>
>
>
> 2006/12/29, Matthew Fredrickson < creslin at digium.com>:
> It sounds like it isn't configured correctly.  Are you sure that your
> cabling is ok and that your span= line is correct?
>
> Matthew Fredrickson
>
> On Dec 28, 2006, at 8:29 PM, Josué Conti wrote:
>
> > Hi all, as good?
> > I am trying to go up a board TE110P with link E1 ISDN PRI to establish
> > connection with a central office Siemens HiPath 4000. But I am having
> > the following errors:
> >
> >  Server1:~ # asterisk -r
> >  Asterisk 1.2.10, Copyright (C) 1999 - 2006 Digium, Inc. and others.
> >  Created by Mark Spencer <markster at digium.com>
> >  Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty' for
> > details.
> >  This is free software, with components licensed under the GNU General
> > Public
> >  License version 2 and other licenses; you are welcome to redistribute
> > it under
> >  certain conditions. Type 'show license' for details.
> >
> > =======================================================================
> > ==
> > Dec 28 21:31:54 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Bad FCS (8) on Primary D-channel of span 1
> >  Dec 28 21:31:54 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Bad FCS (8) on Primary D-channel of span 1
> >  Dec 28 21:31:54 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Bad FCS (8) on Primary D-channel of span 1
> >  Dec 28 21:31:54 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Bad FCS (8) on Primary D-channel of span 1
> >  Dec 28 21:31:54 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Abort (6) on Primary D-channel of span 1
> >  Dec 28 21:31:55 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Bad FCS (8) on Primary D-channel of span 1
> >  Dec 28 21:31:55 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Abort (6) on Primary D-channel of span 1
> >  Dec 28 21:31:55 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Bad FCS (8) on Primary D-channel of span 1
> >  Dec 28 21:31:55 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Bad FCS (8) on Primary D-channel of span 1
> >  Dec 28 21:31:55 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Bad FCS (8) on Primary D-channel of span 1
> >  Dec 28 21:31:55 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Bad FCS (8) on Primary D-channel of span 1
> >  Dec 28 21:31:55 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Abort (6) on Primary D-channel of span 1
> >  Dec 28 21:31:56 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Bad FCS (8) on Primary D-channel of span 1
> >  Dec 28 21:31:56 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Abort (6) on Primary D-channel of span 1
> >  Dec 28 21:31:56 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Abort (6) on Primary D-channel of span 1
> >  Dec 28 21:31:56 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Bad FCS (8) on Primary D-channel of span 1
> >  Dec 28 21:31:56 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Abort (6) on Primary D-channel of span 1
> >  Dec 28 21:31:56 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Bad FCS (8) on Primary D-channel of span 1
> >  Dec 28 21:31:56 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Abort (6) on Primary D-channel of span 1
> >  Dec 28 21:31:56 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Bad FCS (8) on Primary D-channel of span 1
> >  Dec 28 21:31:57 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Abort (6) on Primary D-channel of span 1
> >  Dec 28 21:31:57 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Abort (6) on Primary D-channel of span 1
> >  Dec 28 21:31:57 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Bad FCS (8) on Primary D-channel of span 1
> >  Dec 28 21:31:57 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Bad FCS (8) on Primary D-channel of span 1
> >  Dec 28 21:31:57 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: HDLC Abort (6) on Primary D-channel of span 1
> >  Dec 28 21:31:57 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got
> > event: Alarm (4) on Primary D-channel of span 1
> >  Dec 28 21:31:57 WARNING[5484]: chan_zap.c:2289 pri_find_dchan: No
> > D-channels available!Using Primary channel 16 as D-channel anyway!
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 1: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 1
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 2: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 2
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 3: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 3
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 4: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 4
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 5: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 5
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 6: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 6
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 7: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 7
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 8: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 8
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 9: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 9
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 10: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 10
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 11: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 11
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 12: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 12
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 13: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 13
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 14: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 14
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 15: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 15
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 17: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 17
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 18: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 18
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 19: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 19
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 20: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 20
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 21: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 21
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 22: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 22
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 23: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 23
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 24: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 24
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 25: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 25
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 26: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 26
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 27: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 27
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 28: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 28
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 29: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 29
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 30: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 30
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event:
> > Detected alarm on channel 31: Red Alarm
> >  Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable
> > to disable echo cancellation on channel 31
> >  Server1*CLI> pri show span 1
> >  Primary D-channel: 16
> >  Status: Provisioned, In Alarm, Down, Active
> >  Switchtype: Q.SIG switch
> >  Type: CPE
> >  Window Length: 0/7
> >  Sentrej: 0
> >  SolicitFbit: 0
> >  Retrans: 0
> >  Busy: 0
> >  Overlap Dial: 0
> >  T200 Timer: 1000
> >  T203 Timer: 10000
> >  T305 Timer: 30000
> >  T308 Timer: 4000
> >  T313 Timer: 4000
> >  N200 Counter: 3
> >  server1*CLI>
> >
> > I all changed the hardware for another server and changed to all the
> > handles, balun and the SPAN of HiPath 4000. It will be some trouble of
> > the hardware in the TE110P?
> >
> > Best Regards
> >
> > Josué
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061229/5766cfcd/attachment-0001.htm

More information about the asterisk-users mailing list