[asterisk-users] International dialplans for Asterisk?

[Doug Crompton]

Wow what a mess! I can imagine how much easier it would be if the world
adopted a country/area/exchange scheme like in the US with known length.
It must be complicated in Germany just within the country. At least in the
US we know what the length should be so if we don't have that we know the
number is in error.

Doug


On Fri, 22 Dec 2006, Anselm Martin Hoffmeister wrote:

> Am Freitag, den 22.12.2006, 00:53 -0500 schrieb Doug Crompton:
> > Question... What is the purpose of the + before the number? Does anyone
> > actually have to enter it? If so how would you do it? It is not used in
> > the US but do I see it come in on SIP lines CID. I assume the CID ignores
> > it in the number as I do not see it on the display. It is however stored
> > in asterisk and when doing CID comparisions it can be a problem.
>
> The "+" is replaced by the telco you are connected to - by whatever the
> local prefix for "international call" is. In the US and  Canada it will
> be 011, in most parts of the world "00", and there is Russia with its
> exotic "08 wait for beep 10"... The "+" should work in GSM mobile
> networks and most SIP providers seem to accept it.
>
> For callerid, there seem to be several cases. One of my providers (the
> others manage better and always give "00492281234567" formatted numbers)
> gives CID as "+491601234567" for calls from one German mobile network,
> "491637654321" from a second network and "02281234567" from landline, so
> my dialplan has to cope with that such that my endpoints show the proper
> number. This is done by the following logic:
>
> If number begins with "+", strip it.
> If number begins with anything but 0, prepend "00".
> If number begins with "0049", replace by "0".
>
> Although in Germany you can dial "0049" (region) (number), readability
> is better when there is only the "0" (region) (number) on the display -
> especially as numbers tend to get long, and e.g. Grandstream BT-100 only
> have a 12-digit display.
>
> BTW the longest number I _think_ is planned in Germany is 9 digits after
> the area code for 2- and 3-digit area codes, 8 for 4-, and 7 for 5-digit
> areacodes. There is one exception though that I know of: One of our
> ministeries has usually 55-4444 numbers (55 being their number, then
> four digits DDI), but their fax numbers are 8-digit. Thus resulting in
> total in 011-49-228-55-87654321 from US, 18 digits.
>
> If you can, leave room for long numbers.
>
> BR
> Anselm
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


"Those that sacrifice essential liberty to obtain a little temporary safety
 deserve neither liberty nor safety."  -- Ben Franklin (1759)

****************************
*  Doug Crompton	   *
*  Richboro, PA 18954	   *
*  215-431-6307		   *
*		  	   *
* doug at crompton.com        *
* http://www.crompton.com  *
****************************