[asterisk-users] 2 devices using same sip account

[Peder at NetworkOblivion]

It doesn't have anything to do with hardphone versus softphone.  The 
issue is that it can only keep track of one registration per account. 
When the hardphone gets unplugged, it will not know about the softphone 
until it registers with asterisk.  It's initial registration was lost 
when the hardphone registered with the same info.

rilawich ango wrote:
> It seems that Greg is truth for the case.  Asterisk doesn't care how
> many devices register to the same account as it is a feature of sip
> protocol (please let me know if there is a method to restrict it).
> 
> In my case, I use a soft phone an hard phone using the same sip
> account information to register to the same asterisk.  Soft phone
> register first and then hard phone register later.  I dial the number
> and hard phone ring.  Then I disconnect hard phone and expect soft
> phone will be ring after a couple of time.  However, soft phone didn't
> ring as the call is failed.  I issue "database showkey
> SIP/Registry/sip account" in CLI.  It displays the information which
> belongs to hard phone.  That's mean asterisk will keep the information
> of hard phone even it is disconnected with ignoring the soft phone
> registration.  Does asterisk can be set to refresh its registry in a
> couple of time to remove the old registry record?
> 
> On 12/19/06, Johansson Olle E <olle at voop.com> wrote:
>>
>> 19 dec 2006 kl. 11.58 skrev Gregory Duchatelet:
>>
>> > Hi,
>> >
>> > It seems that they both can make calls, but only one can receive
>> > call: the
>> > last registered...
>> >
>> > Greg
>> >
>> >> Hi all,
>> >>   What will happen if 2 devices using the same set of sip account to
>> >> connect to the same asterisk?  Do they both can make call?  Can they
>> >> receive call as normal?
>> >> _______________________________________________
>> >> --Bandwidth and Colocation provided by Easynews.com --
>> >>
>> In Asterisk, you should only have one phone per account. We do not
>> support
>> multiple devices per account. The PBX core needs to know how many
>> devices
>> that we are calling each time we access it.
>>
>> /O
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 

-- 

Network stuff you didn't know....
http://www.networkoblivion.com