[asterisk-users] call from h323 to SIP

[Pavel Jezek]

in h323.conf you have still:
disallow=all
allow=all         

try change to:
disallow=all
allow=alaw



nik600 wrote:
> On 12/15/06, Pavel Jezek <pavel.jezek at i.cz> wrote:
>> probably you haven't g729 installed in asterisk, use g711 instead, put
>> this in h323.conf and in callmanager place asterisdk gateway in region
>> that will use g711...
>> disallow=all
>> allow=alaw
>>
>> alternatively you can find g729 codecs binaries here:
>> http://kvin.lv/pub/Linux/Asterisk/
>>
>>
>
> I am experiencig the same problem:
>
> h323.conf:
> disallow=all
> allow=all               ; turns on all installed codecs
>
> sip.conf:
> disallow=all                    ; First disallow all codecs
> ;allow=all                      ; Allow codecs in order of preference
> allow=g711
> allow=ulaw
>
> extension.conf:
> exten = 3298,1,Set(SIP_CODEC=alaw)
> exten = 3298,2,Answer
> exten = 3298,3,Dial(SIP/user at 193.x.x.x)
>
>    -- Executing Set("H323/ip$172.z.z.z:1630/20", "SIP_CODEC=alaw") in 
> new stack
>    -- Executing Answer("H323/ip$172.z.z.z:1630/20", "") in new stack
>    -- Executing Dial("H323/ip$172.1z.z.z:1630/20",
> "SIP/user at 193.x.x.x") in new stack
>    -- Called user at 193.x.x.x
>    -- SIP/193.x.x.x-40451408 is ringing
>    -- Got SIP response 606 "Not Acceptable" back from 193.x.x.x
>  == No one is available to answer at this time (1:0/0/0)
>  == Auto fallthrough, channel 'H323/ip$172.z.z.z:1630/20' status is 
> 'NOANSWER'
>
> What means 606 ?
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users