[asterisk-users] Problem in making outbound calls in PRI

[Danny]

Hey everyone !

This config worked !

; zapata.conf
[channels]
language=en
context=from-pstn
switchtype=euroisdn
pridialplan=local
signalling=pri_cpe
usecallerid=yes
hidecallerid=no
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
group=0
callgroup=1
pickupgroup=1
channel => 1-15,17-31


Thank you !

- Danny


Doug Lytle wrote:
> Danny wrote:
>>
>>
>> Is there anybody who can help me out on this ?
>>
>> I am pretty much lost in forums and docs, and I m getting nowhere.
>
> Danny,
>
> You've got a lot of stuff in there that isn't used for a PRI/ISDN.  
> Mine setup attached.  This if for a T1, and in the US.  Please make 
> adjustments for your area:
>
> [zaptel.conf]
>
> span=1,1,0,esf,b8zs
> defaultzone=us
> loadzone=us
> bchan=1-23
> dchan=24
>
> span=2,0,0,esf,b8zs
> fxsks=25-32
> fxoks=33-48
> defaultzone=us
> loadzone=us
>
> [zapata.conf]
>
> [channels]
>
> musiconhold=tape
> switchtype=national
> context=pri
> signalling=pri_cpe
> group=1
> echocancel=yes
> echotraining=yes
> echocancelwhenbridged=yes
> rxgain=-1.0
> txgain=-4.0
> busydetect=no
> callprogress=no
> pridialplan=unknown
> usercallerid=yes
> callerid=asreceived
> channel => 1-23
>
>