[asterisk-users] send fax by Iaxmodem ?

[Marco Mouta]

Hi Guys,

I'm using Asterisk with Hylafax to send and receive faxes, currently only
receinving with success.

When sending i get this:

Dec 13 11:28:07.51: [ 9242]: SESSION BEGIN 000000157 03510212079
Dec 13 11:28:07.51: [ 9242]: HylaFAX (tm) Version 4.3.1
Dec 13 11:28:07.51: [ 9242]: SEND FAX: JOB 1 DEST 2079^M COMMID 000000157
DEVICE '/dev/ttyIAX' FROM 'Marco Mouta <marco.mouta at link.pt>' USER root
Dec 13 11:28:07.51: [ 9242]: STATE CHANGE: RUNNING -> SENDING
Dec 13 11:28:07.51: [ 9242]: <-- [12:AT+FCLASS=1\r]
Dec 13 11:28:07.51: [ 9242]: --> [2:OK]
Dec 13 11:28:07.51: [ 9242]: MODEM set XON/XOFF/FLUSH: input ignored, output
disabled
Dec 13 11:28:07.51: [ 9242]: DIAL 2079^M
Dec 13 11:28:07.51: [ 9242]: <-- [9:ATDT2079\r]
Dec 13 11:28:16.70: [ 9242]: --> [4:BUSY]
Dec 13 11:28:46.70: [ 9242]: MODEM TIMEOUT: reading line from modem
Dec 13 11:28:46.71: [ 9242]: MODEM <Timeout>
Dec 13 11:28:46.71: [ 9242]: SEND FAILED: JOB 1 DEST 2079^M ERR Unknown
problem
Dec 13 11:28:46.71: [ 9242]: <-- [5:ATH0\r]
Dec 13 11:28:46.71: [ 9242]: --> [2:OK]
Dec 13 11:28:46.71: [ 9242]: MODEM set DTR OFF
Dec 13 11:28:46.71: [ 9242]: MODEM set baud rate: 0 baud (flow control
unchanged)
Dec 13 11:28:46.71: [ 9242]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Dec 13 11:28:46.71: [ 9242]: SESSION END

I Must say on the reception side is a normal fax connected to pstn line, and
to send fax via Asterisk+Hylafax i've tested TE110P and X100P board.

I got few sucess with x100p and couldn't send even one with TE110p

Any tips?


On 12/13/06, Noc Phibee <noc at phibee.net> wrote:
>
> Hi
>
> i use now iaxmodem for receive fax and that's work very good with
> Hylafax ;=)
>
> Do you know if we can sent fax using iaxmodem and Hylafax ?
>
> when i test:
>
> déc 13 13:47:21.12: [13725]: SESSION BEGIN 000000014 330426690268
> déc 13 13:47:21.12: [13725]: HylaFAX (tm) Version 4.3.0
> déc 13 13:47:21.12: [13725]: SEND FAX: JOB 2 DEST 0426690268 COMMID
> 000000014 DEVICE '/dev/iaxmodem1' FROM 'localtest>' USER test
> déc 13 13:47:21.12: [13725]: STATE CHANGE: RUNNING -> SENDING
> déc 13 13:47:21.12: [13725]: <-- [12:AT+FCLASS=r]
> déc 13 13:47:21.12: [13725]: --> [2:OK]
> déc 13 13:47:21.12: [13725]: MODEM set XON/XOFF/FLUSH: input ignored,
> output disabled
> déc 13 13:47:21.12: [13725]: DIAL 0426690268
> déc 13 13:47:21.12: [13725]: <-- [15:ATDT0426690268\r]
> déc 13 13:47:21.12: [13725]: --> [11:NO DIALTONE]
> déc 13 13:47:21.12: [13725]: SEND FAILED: JOB 2 DEST 0426690268 ERR No
> local dialtone
> déc 13 13:47:21.12: [13725]: <-- [5:ATH0\r]
> déc 13 13:47:21.12: [13725]: --> [2:OK]
> déc 13 13:47:21.12: [13725]: MODEM set DTR OFF
> déc 13 13:47:21.12: [13725]: MODEM set baud rate: 0 baud (flow control
> unchanged)
> déc 13 13:47:21.12: [13725]: STATE CHANGE: SENDING -> MODEMWAIT (timeout
> 5)
> déc 13 13:47:21.12: [13725]: SESSION END
>
>
> Thanks bye
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061213/02c2376b/attachment.htm