[asterisk-users] X100P clone dial problems.

[Klaverstyn, David C]

Well I finally got it to work.  I changed the DSL filter and it started
to work.  Very strange.

Thanks for everyone's suggestions.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Howard
Lowndes
Sent: Tuesday, 12 December 2006 5:17 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] X100P clone dial problems.

Well, my PSTN card has:

signalling-fxs_ks

and that works for me.

Klaverstyn, David C wrote:
> Thanks for your help.
> 
>  
> 
> This is my file.
> 
>  
> 
>  
> 
>  
> 
> [channels]
> 
>  
> 
> language=au
> 
> context=from-pstn
> 
> signalling=fxo_ks
> 
>  
> 
> ;rxwink=300
> 
>  
> 
> usecallerid=yes
> 
> hidecallerid=no
> 
> callwaiting=yes
> 
> usecallingpres=yes
> 
> callwaitingcallerid=yes
> 
> threewaycalling=yes
> 
> transfer=yes
> 
> canpark=yes
> 
> cancallforward=yes
> 
> callreturn=yes
> 
> echocancel=yes
> 
> echocancelwhenbridged=yes
> 
> rxgain=0.0
> 
> txgain=0.0
> 
> callgroup=1
> 
> pickupgroup=1
> 
> immediate=no
> 
>  
> 
> channel => 1
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
> Upon reloading asterisk I get the following errors.
> 
>  
> 
>  
> 
> Dec 11 19:03:45 WARNING[5265]: chan_zap.c:10874 setup_zap: Ignoring 
> signalling
> 
> Dec 11 19:03:45 ERROR[5265]: chan_zap.c:10305 setup_zap: Unable to 
> reconfigure channel '1'
> 
>  
> 
>  
> 
>  
> 
>  
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Howard
Lowndes
> Sent: Monday, 11 December 2006 6:00 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] X100P clone dial problems.
> 
>  
> 
>  
> 
>  
> 
> Klaverstyn, David C wrote:
> 
>>  I have since added fxs_ks=1
> 
>  
> 
>  
> 
> This is meaningless.  Follow the example that I posted.
> 
>  
> 
>  
> 
>  
> 
>   and channel => 1
> 
>>
> 
>>  This has not fixed the problem.  I do notice a warning on the reload
of
> 
>>  asterisk.
> 
>>
> 
>>  WARNING[4296]: chan_zap.c:10874 setup_zap: Ignoring signalling
> 
>>
> 
>>  -----Original Message-----
> 
>>  From: asterisk-users-bounces at lists.digium.com
> 
>>  [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
Tzafrir
> 
>>  Cohen
> 
>>  Sent: Monday, 11 December 2006 4:47 PM
> 
>>  To: asterisk-users at lists.digium.com
> 
>>  Subject: Re: [asterisk-users] X100P clone dial problems.
> 
>>
> 
>>  On Mon, Dec 11, 2006 at 04:18:20PM +1100, Klaverstyn, David C wrote:
> 
>> > I'm not sure if I have a configuration problem or not. I am unable
to
> 
>> > dial out. When I try to dial in I can hear the phone ring on the
> 
>> > dialling phone but Asterisk does not register anything.
> 
>> > 
> 
>> > 
> 
>> > 
> 
>> > 
> 
>> > 
> 
>> > In zaptel.conf I have
> 
>> > 
> 
>> > 
> 
>> > 
> 
>> > loadzone = au
> 
>> > 
> 
>> > defaultzone=au
> 
>> > 
> 
>> > fxsks=1
> 
>> > 
> 
>> > 
> 
>> > 
> 
>> > In zapata.conf
> 
>> > 
> 
>> > 
> 
>> > 
> 
>> > language=au
> 
>> > 
> 
>> > context=from-pstn
> 
>> > 
> 
>>
> 
>>  Those need to be in the section [channels] and be followed by a
> 
>>
> 
>>   channel => 1
> 
>>
> 
>>  to actually have any effect. You also must set signaling (signalling
=
> 
>>  fxs_ks; in your case).
> 
>>
> 
>  
> 
> -- 
> 
> Howard.
> 
> LANNet Computing Associates - Your Linux people
<http://lannetlinux.com>
> 
> When you want a computer system that works, just choose Linux;
> 
> When you want a computer system that works, just, choose Microsoft.
> 
> --
> 
> Flatter government, not fatter government; abolish the Australian
states.
> 
>  
> 
> _______________________________________________
> 
> --Bandwidth and Colocation provided by Easynews.com --
> 
>  
> 
> asterisk-users mailing list
> 
> To UNSUBSCRIBE or update options visit:
> 
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
>
------------------------------------------------------------------------
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
Howard.
LANNet Computing Associates - Your Linux people <http://lannetlinux.com>
When you want a computer system that works, just choose Linux;
When you want a computer system that works, just, choose Microsoft.
--
Flatter government, not fatter government; abolish the Australian
states.

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users