[asterisk-users] repost gain problem with asterisk and zaptel 1.4

[jason]

doh. thanks guys.   It's always the simple stuff :-) Moved the channel 
statement around and works great. 

Eric "ManxPower" Wieling wrote:
> You MUST set the options BEFORE the channel= line or they won't be used.
>
> jason wrote:
>> Most certainly.  This is my current file.  I've toyed with the gain 
>> settings, going as high as 100 on rxgain and even toyed with txgain 
>> for a bit.  It's very bare because I haven't invested any further 
>> time into this machine until I get the gain figured out. On a side 
>> note, I've used this card in a Xen VM running 1.2 and did not have 
>> any gain issues.
>>
>> ----------------------------------
>> ; Zapata telephony interface
>>
>> [trunkgroups]
>> ;
>> [channels]
>> ;
>> context=incoming
>> switchtype=national
>> ;
>> signalling=fxs_ks
>> channel=>1
>> usecallerid=yes
>> cidsignalling=bell
>> hidecallerid=no
>> callwaiting=yes
>> usecallingpres=yes
>> callwaitingcallerid=yes
>> threewaycalling=yes
>> transfer=yes
>> canpark=yes
>> cancallforward=yes
>> callreturn=yes
>> echocancel=yes
>> echocancelwhenbridged=no
>> rxgain=0.0
>> txgain=0.0
>> group=1
>> callgroup=1
>> pickupgroup=1
>> immediate=no
>> musiconhold=default
>>
>>
>>
>> Tzafrir Cohen wrote:
>>> On Tue, Dec 12, 2006 at 08:57:05AM -0600, jason wrote:
>>>  
>>>> Hey guys, I'm having some trouble with gain settings using a 
>>>> Wildcard X100P and Zaptel 1.4 Beta 2 on Asterisk 1.4 beta 3.  My 
>>>> transmit volume between an IAX client (idefisk) and a POTS device 
>>>> through my 1.4 box is great, but my receive volume is terrible.  I 
>>>> can hardly hear a word they say. I've cranked my gains up to 100,  
>>>> inserted the wcfxo module with boost=1, but haven't had any luck 
>>>> figuring this out.   Using ztmonitor, the best I can get on my RX 
>>>> side is 3 #'s (###)) and that's if I really talk loudly into the 
>>>> phone.   Any pointers on other places I can look? Volume is great 
>>>> on IAX to IAX, only poor on calls from IAX to POTS.  I haven't 
>>>> tried the other direction because this box isn't setup to receive 
>>>> POTS calls.
>>>>     
>>>
>>> Could you post your zapata.conf ?
>>>
>>>   
>>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>

-- 
Jason
The place where you made your stand never mattered,
only that you were there... and still on your feet