[asterisk-users] TDM2400

[O.Kamal]

I figured out the problem, it is the location of FXO boards on cards,
channels are from 9-24 not 1-16.

Thanks all for your help, specially Tzafrir, genzaptelconf shows it clearly.

On 12/11/06, O. Kamal <okamalo at gmail.com> wrote:
>
> here is the latest update:
> in zaptel.conf i used
> fxsks=1-4
> fxsks=5-8
> fxsks=9-12
> fxsks=13-16
> zttool shows hardware OK
> ztcfg worked normally
> in zapata.conf when i define the channels "channel=>1-16" and restaring
> asterisk it gives the below errors:
> Dec 12 00:48:28 WARNING[3141]: chan_zap.c:921 zt_open: Unable to specify
> channel 1: No such device
> Dec 12 00:48:28 ERROR[3141]: chan_zap.c:6879 mkintf: Unable to open
> channel 1: No such device
> here = 0, tmp->channel = 1, channel = 1
> Dec 12 00:48:28 ERROR[3141]: chan_zap.c:10307 setup_zap: Unable to
> register channel '1-16'
> Dec 12 00:48:28 WARNING[3141]: loader.c:414 __load_resource: chan_zap.so:
> load_module failed, returning -1
> Dec 12 00:48:28 WARNING[3141]: loader.c:554 load_modules: Loading module
> chan_zap.so failed!
>
> When I remove the "channel=>1-16", it loads normally. zapata.conf is
> below:
>
> [channels]
> context=default
> signalling=fxs_ls
> ;channel=>1-16
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> restrictcid=no
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> group=1
> ;accountcode=lss0101
> answeronpolarityswitch=yes
> hanguponpolarityswitch=yes
>
> any clue?
>
> On 12/11/06, Tzafrir Cohen <tzafrir.cohen at xorcom.com> wrote:
> >
> > On Mon, Dec 11, 2006 at 09:40:18AM +1100, Howard Lowndes wrote:
> > >
> > >
> > > O.Kamal wrote:
> > > >I have 16 channels FXO (4 FXO Modules), I did follow the below link,
> > but
> > > >maybe I understand it wrong (what is a module and slot?), I need an
> > > >example.
> > > >http://kb.digium.com/entry/1/90/ <http://kb.digium.com/entry/1/90/>
> > > >
> > > >"For each FXO module, you should have a coresponding line that reads:
> >
> > > >"fxs" followed by the type of signalling (gs, ls, or ks) and the
> > equals
> > > >sign (=) followed by the position of the module times 4 minus 3 a
> > dash,
> > > >and then the number of the slot times 4.  For example, if you had a
> > FXO
> > > >module on slot 2 of the board using loopstart signalling, the line
> > would
> > > >read: "fxols=5-8", or if the module was on slot 5, the line would
> > read:
> > > >"fxols=17-20"
> > >
> > > OK, try either:
> > >
> > > fxsks=1-16
> > >
> > > or:
> > >
> > > fxsks=1-4
> > > fxsks=5-8
> > > fxsks=9-12
> > > fxsks=13-16
> > >
> > >
> > > probably the latter will be correct
> >
> > Both are. Alternatively, genzaptelconf (xpp/utils/genzaptelconf) will
> > generate a working (though a bit verbose) configuration.
> >
> > --
> >                Tzafrir Cohen
> > icq#16849755                     jabber:tzafrir at jabber.org
> > +972-50-7952406           mailto:tzafrir.cohen at xorcom.com
> > http://www.xorcom.com   iax:guest at local.xorcom.com/tzafrir
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061211/ab9b8a63/attachment.htm