[asterisk-users] Re: How to communicated Both SIP and IAX2 each other?

[Andrew Joakimsen]

The protocol does not matter. If jitterbuffer is off then asterisk gets the
packets and sends them to the IAX clients without jitterbuffer just as if it
was another SIP client w/o jb.

On 12/8/06, Pavel Jezek <pavel.jezek at i.cz> wrote:
>
> so that, jitterbuffer should be enabled & forced on sip and iax channel
> on asterisk (because UAs have no knowledge about jitter on opposite
> link), from first example?
>
> UA(sip)----------->OpenSER------> Asterisk------> UA(IAX2)
>
>
>
>
> Steven wrote:
> > Nothing is end to end in this case.
> >
> > It is two separate sessions, one SIP and one iax.
> >
> >
> >
> >
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061211/956dc171/attachment.htm