[asterisk-users] Monitor Zap Status - Full E-mail...

[Andrew Joakimsen]

So there are "0" watchers while the GXP is configured to that hint? are you
sure you set the phone to "Asterisk BLF"?

On 11/15/06, Ken Williams <ken at intermountainelectronics.com> wrote:
>
>  Upon further investigation I must be doing something wrong.
>
> It was my understanding that a "hint" extension could be anything, it
> wasn't the same as a real extension, though you could make it the same to
> make it easier.
>
> That being said *exten => 702,hint,SIP/702 *works, while *exten =>
> 102,hint,SIP/702*  doesn't.
>
> I've got a GXP-2000 with the first button set to AsteriskBLF username 102
> and the second button set to AsteriskBLF username 702, only the second
> button actively monitors 702.
>
> I've read, reread, rereread and so on a ot of examples of hint files and I
> can't figure out why the GXP-2000 doesn't like them.  When I do *show
> hints* in CLI it is registering both 102 & 702 properly.
>
>
>  ------------------------------
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Ken Williams
> *Sent:* Wednesday, November 15, 2006 1:54 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* [asterisk-users] Monitor Zap Status - Full E-mail...
>
>  I've installed Grandstream GPX-2000 phones and have successfully enabled
> one of my buttons to use Asterisk BLF for an extension.  I can tell when
> this extension is available, is being rung, or is on the line.
>
> I'd like to do the same for my Zaptel channels, to be able to see when a
> line is onhook, ringing or offhook.
>
> I tried the following but alas, it doesn't seem to be working:
>
> *exten => 102,hint,ZAP/2*
>
> I based that on:
>
> *exten => 732,hint,SIP/732
> *
> which does work for the SIP phones.
>
> If I do "show hints" in the CLI, I get
>
>    102                 : ZAP/2                 State:Idle
> Watchers  0
>    732                 : ZAP/1                 State:Idle
> Watchers  0
>
> When a call is made on the ZAP/2 line the State changes to InUse, so I
> know it's working on that side.
>
> Any thoughts or suggestions as to how I can monitor a ZAP line on my
> GPX-2000?  The problem is we have 6 lines, so my plan was to use the 7
> buttons down the side, the top 6 for lines and the 7th for paging.
>
> Thanks for the help,
> Ken
>
>
>
> *Sorry about duplicate e-mail, accidentally hit ENTER when holding CTRL
> instead of V to paste....
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061208/16ebd1ea/attachment.htm