[asterisk-users] -- Called 12127773456@OOH323 Segmentation fault (core dumped)

[Ümit AYDINLI]

OOH323 Debugging Enabled
    -- Executing Answer("SIP/3513-090f7d40", "") in new stack
    -- Executing Wait("SIP/3513-090f7d40", "1") in new stack
    -- Executing DeadAGI("SIP/3513-090f7d40", "a2billing.php|1") in new
stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/a2billing.php
  a2billing.php|1: line:58 - IDCONFIG : 1
  a2billing.php|1:
  a2billing.php|1: line:67 - MODE : standard
  a2billing.php|1:
    -- AGI Script Executing Application: (Dial) Options: (
OOH323/12127773456 at OOH323|60|HLxyz(5400000:31000:00000))
---   ooh323_request - data 12127773456 at OOH323 format 0x4 (ulaw)
---   find_peer
+++   find_peer
+++   ooh323_request
---   ooh323_call- 12127773456 at OOH323
+++   ooh323_call
    -- Called 12127773456 at OOH323
Segmentation fault (core dumped)
[root at asterisk1 ~]#


show version
Asterisk 1.2.12.1 built by root @ localhost.localdomain on a i686 running
Linux on 2006-10-18 18:35:57 UTC


; Objective System's H323 Configuration example for Asterisk
; ooh323c driver configuration
;
; [general] section defines global parameters
;
; This is followed by profiles which can be of three types -
user/peer/friend
; Name of the user profile should match with the h323id of the user device.
; For peer/friend profiles, host ip address must be provided as "dynamic" is
; not supported as of now.
;
; Syntax for specifying a H323 device in extensions.conf is
; For Registered peers/friends profiles:
;        OOH323/name where name is the name of the peer/friend profile.
;
; For unregistered H.323 phones:
;        OOH323/ip[:port] OR if gk is used OOH323/alias where alias can be
any H323
;                          alias
;
; For dialing into another asterisk peer at a specific exten
;       OOH323/exten/peer OR OOH323/exten at ip
;
; Domain name resolution is not yet supported.
;
; When a H.323 user calls into asterisk, his H323ID is matched with the
profile
; name and context is determined to route the call
;
; The channel driver will register all global aliases and aliases defined in

; peer profiles with the gatekeeper, if one exists. So, that when someone
; outside our pbx (non-user) calls an extension, gatekeeper will route that
; call to our asterisk box, from where it will be routed as per dial plan.


[general]
;Define the asetrisk server h323 endpoint

;The port asterisk should listen for incoming H323 connections.
;Default - 1720
port=1720

;The dotted IP address asterisk should listen on for incoming H323
;connections
;Default - tries to find out local ip address on it's own
bindaddr=213.138.36.153

;This parameter indicates whether channel driver should register with
;gatekeeper as a gateway or an endpoint.
;Default - no
gateway=yes

;Whether asterisk should use fast-start and tunneling for H323 connections.
;Default - yes
faststart=no
;h245tunneling=yes


;H323-ID to be used for asterisk server
;Default - Asterisk PBX
h323id=ObjSysAsterisk
;e164=100

;CallerID to use for calls
;Default - Same as h323id
callerid=asterisk

;Whether this asterisk server will use gatekeeper.
;Default - DISABLE
;gatekeeper = DISCOVER
gatekeeper = 213.138.36.153
;gatekeeper = DISABLE

;Location for H323 log file
;Default - /var/log/asterisk/h323_log
logfile=/var/log/asterisk/h323_log


;Following values apply to all users/peers/friends defined below, unless
;overridden within their client definition

;Sets default context all clients will be placed in.
;Default - default
context=default

;Sets rtptimeout for all clients, unless overridden
;Default - 60 seconds
;rtptimeout=60     ; Terminate call if 60 seconds of no RTP activity
                    ; when we're not on hold

;Type of Service
;Default - none (lowdelay, thoughput, reliability, mincost, none)
;tos=none

;amaflags = default

;The account code used by default for all clients.
;accountcode=h3230101

;The codecs to be used for all clients.Only ulaw and gsm supported as of
now.
;Default - ulaw
; ONLY ulaw, gsm, g729 and g7231 supported as of now
allow=all     ;Note order of disallow/allow is important.
;allow=g729
;allow=ulaw


; dtmf mode to be used by default for all clients. Supports rfc2833,
q931keypad
; h245alphanumeric, h245signal.
;Default - rfc 2833
dtmfmode=rfc2833

; User/peer/friend definitions:
; User config options                    Peer config options
; ------------------                     -------------------
; context
; disallow                               disallow
; allow                                  allow
; accountcode                            accountcode
; amaflags                               amaflags
; dtmfmode                               dtmfmode
; rtptimeout                             ip
;                                        port
;                                        h323id
;                                        email
;                                        url
;                                        e164
;                                        rtptimeout

;

;Define users here
;Section header is extension
;[myuser1]
;type=user
;context=context1
;disallow=all
;allow=gsm
;allow=ulaw



[dol_h323]
type=peer
ip=83.66.50.2   ; UPDATE with appropriate ip address
port=1720    ; UPDATE with appropriate port
disallow=all
allow=g729

;[myfriend1]
;type=friend
;context=default
;ip=10.0.0.82   ; UPDATE with appropriate ip address
;port=1820    ; UPDATE with appropriate port
;disallow=all
;allow=ulaw
;e164=12345
;rtptimeout=60
;dtmfmode=rfc2833
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061207/b8592aff/attachment.htm