[asterisk-users] T1 PRI not announce "this is long distance call, please add 1 for this call..."

[Andrew Joakimsen]

do something like this in your extensions.conf:

exten => _NXXNXXXXXX,1,Dial(ZAP/g0/1{$EXTEN})
exten => _222NXXXXXX,1,Dial(ZAP/g0/{$EXTEN})
exten => _223NXXXXXX,1,Dial(ZAP/g0/{$EXTEN})
exten => _224NXXXXXX,1,Dial(ZAP/g0/{$EXTEN})

Where 222, 223 and 224 are local area codes.


On 12/4/06, Isaac Xiao <isaac.x at kvbkunlun.com> wrote:
>
>  Can any one help? In Toronto, we can't identify if a number is long
> distance call or not. If long distance call, we have to prefix with 1. We
> should hear a voice prompt as above to indicate that it is not a local call.
> However, we hear the normal ring back tone (indicating the phone had been
> connected, but actually not) when we call this long distance call without
> prefixing "1".
>
> Here is the message shown in CLI.
>
> Requested transfer capability: 0x00 - SPEECH
>
>     -- Called g0/9056671191
>
>     -- Zap/1-1 is proceeding passing it to SIP/9188-0e6a
>
>     -- PROGRESS with cause code 127 received
>
> -- Zap/1-1 is making progress passing it to SIP/9188-0e6a
>
>
>
> Thanks in advances.
>
> Isaac
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061204/e017c409/attachment.htm