[asterisk-users] Detailed description of problem in Poland

[Tim Panton]

On 2 Dec 2006, at 16:59, Alex Rixhardson wrote:

> Hi guys,
>
> Here is a bit more detailed information of my problem:
>
> If I connect Asterisk PBX to the Polish telco via E1, I don't get  
> any red alarms or anything. The line seems to be fine and the  
> inbound calls are also accepted by the Asterisk. However, whenever  
> I try to make an outbound call, the call is either stuck (Asterisk  
> just displays Called g1/482.... and then nothing), or I get the  
> following message:
>
>     -- Called g2/........
>     -- Channel 0/1, span 3 got hangup
>     -- Zap/63-1 is circuit-busy
>     -- Hungup 'Zap/63-1'
>   == Everyone is busy/congested at this time (1:0/1/0)
>
> The telco guys say that my request to make an outbound call is  
> missing a RING message. What must be set in the zapata.conf or  
> zaptel.conf to make Asterisk send RING message? Does anyone have  
> any sample zapata.conf or zaptel.conf for connection between  
> Asterisk to Polish telco via E1?

I don't think (based on the debug output in your other email) that it  
is getting to the 'ring' phase.
the telco rejects the call as having a protocol error in the setup  
message. They don't like
one of the info elements in your setup message.

You could try playing with the TON and calling name fields.
(
pridialplan=
usecallerid=
hidecallerid=
usecallingpres=

in zapata.conf
)
Tim.

>
> Any suggestions will be most appreciated,
> Alex
>
> Check out the all-new Yahoo! Mail beta - Fire up a more powerful  
> email and get things done faster.
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

Tim Panton

www.mexuar.net
www.westhawk.co.uk/