[asterisk-users] Problem in Poland

[Alex Rixhardson]

This is what PRI debug says on problematic call:

> Protocol Discriminator: Q.931 (8)  len=42
> Call Ref: len= 2 (reference 3/0x3) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a3]
> Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer capability: Speech (0)
>                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode (16)
>                              Ext: 1  User information layer 1: A-Law (35)
> [18 03 a1 83 81]
> Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, Preferred Dchan: 0
>                        ChanSel: Reserved
>                       Ext: 1  Coding: 0   Number Specified   Channel Type: 3
>                       Ext: 1  Channel: 1 ]
> [28 07 75 6e 6b 6e 6f 77 6e]
> Display (len= 7) [ unknown ]
> [6c 0a 00 80 41 67 65 6e 74 30 39 39]
> Calling Number (len=12) [ Ext: 0  TON: Unknown Number Type (0)  NPI: Unknown Number Plan (0)
>                           Presentation: Presentation permitted, user number not screened (0) 'Agent099' ]
> [70 04 80 34 38 32]
> Called Number (len= 6) [ Ext: 1  TON: Unknown Number Type (0)  NPI: Unknown Number Plan (0) '482' ]
    -- Called g1/482
< Protocol Discriminator: Q.931 (8)  len=13
< Call Ref: len= 2 (reference 3/0x3) (Terminator)
< Message type: STATUS (125)
< [08 03 81 e4 6c]
< Cause (len= 5) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location: Private network serving the local user (1)
<                  Ext: 1  Cause: Invalid information element contents (100), class = Protocol Error (6) ]
<              Cause data 1: 6c (108)
< [14 01 06]
< Call State (len= 3) [ Ext: 0  Coding: CCITT (ITU) standard (0) Call state: Call Present (6)
-- Processing IE 8 (cs0, Cause)
-- Processing IE 20 (cs0, Call State)
< Protocol Discriminator: Q.931 (8)  len=10
< Call Ref: len= 2 (reference 3/0x3) (Terminator)
< Message type: SETUP ACKNOWLEDGE (13)
< [18 03 a9 83 81]
< Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
<                        ChanSel: Reserved
<                       Ext: 1  Coding: 0   Number Specified   Channel Type: 3
<                       Ext: 1  Channel: 1 ]
-- Processing IE 24 (cs0, Channel Identification)
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Overlap sending, peerstate Overlap Receiving
> Protocol Discriminator: Q.931 (8)  len=9
> Call Ref: len= 2 (reference 3/0x3) (Originator)
> Message type: DISCONNECT (69)
> [08 02 81 90]
> Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location: Private network serving the local user (1)
>                  Ext: 1  Cause: Normal Clearing (16), class = Normal Event (1) ]
    -- Hungup 'Zap/1-1'
  == Spawn extension (from-sip, 1482, 1) exited non-zero on 'SIP/Agent099-0089f4f0'
< Protocol Discriminator: Q.931 (8)  len=9
< Call Ref: len= 2 (reference 3/0x3) (Terminator)
< Message type: RELEASE (77)
< [08 02 81 90]
< Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location: Private network serving the local user (1)
<                  Ext: 1  Cause: Normal Clearing (16), class = Normal Event (1) ]
-- Processing IE 8 (cs0, Cause)
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release Request
> Protocol Discriminator: Q.931 (8)  len=9
> Call Ref: len= 2 (reference 3/0x3) (Originator)
> Message type: RELEASE COMPLETE (90)
> [08 02 81 90]
> Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location: Private network serving the local user (1)
>                  Ext: 1  Cause: Normal Clearing (16), class = Normal Event (1) ]
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null



----- Original Message ----
From: Bartosz Jozwiak <bartek at cq-link.sr>
To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com>
Sent: Saturday, December 2, 2006 7:06:20 PM
Subject: Re: [asterisk-users] Problem in Poland


>Hello All,
>
>I'm having problems connecting Asterisk to Telco in Poland (using E1). The 
>telco guys are saying that the RING message is missing.
>
>How can I make Asterisk to send the RING message? Does anyone have any 
>samples of zaptel and zapata for Poland?
>
>Best Regards,
>Alex
>
>

which telco in Poland are you connected to? 

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


 
____________________________________________________________________________________
Cheap talk?
Check out Yahoo! Messenger's low PC-to-Phone call rates.
http://voice.yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061202/18b99298/attachment.htm