[asterisk-users] Sipura 3000 and Asterisk

[sdcharly at gmail.com]

Hi all,

Hope this link helps..

http://resource.intel.com/telecom/support/tnotes/tnbyos/2000/tn090.htm

Thanks

Dan




On 01/09/06, Tim St. Pierre <tim at communicatefreely.net> wrote:
>
> The SPA3000 may be looking for proper -48v battery voltage to detect the
> line.
>
> A lot of gateways, PBXs, cheaper ATAs, etc. only put out about 24v or so.
> Most electronic phones can't tell the difference, but it's not up to
> specifications.  Maybe an SPA3000 can.  You can always check it with a
> voltmeter.
>
> -Tim
>
>
>
> On August 31, 2006 12:26, Mark Willis wrote:
> > Francisco Seratti wrote:
> > > Hi pals, im trying to save some money in cellphones calls, so i bought
> > > a GSM gateway and a Sipura SPA3000 gateway.
> > > The GSM gw is currently working, and now im trying to configure the
> > > SPA, but every call i send, i get a 503 service unavailable.
> >
> > It does that if no line is plugged in.
> >
> > Mark
>
> --
> Tim St. Pierre
>
> IP telephony specialist
> sip://5101@communicatefreely.net
> Toronto: 647 722 6930
> Toll-Free 1 888 488 6940
> tim at communicatefreely.net
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060831/8ecaf381/attachment.htm