[asterisk-users] Unknown CLI output

[wendell hamilton]

I'm experiencing the same CLI messages.  No Linksys, a couple of IAXY's,
a couple of polycom's, various softphones, no zap at all.  I'm not
experiencing any noticeable problems, just the cli messages.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Carlos
Leal
Sent: Wednesday, August 30, 2006 2:59 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Unknown CLI output

OK, changed the register interval for the Linksys PAP2T to 10 times  
longer and the output described earlier on the CLI also appears to  
follow the same schedule.

I guess I'll have to check a Linksys list to see what could be  
causing this and if I should expect things to get worse.


On Aug 29, 2006, at 8:21 PM, Carlos Leal wrote:

> I'm wondering if anyone can tell me what the following output,  
> repeated about once per minute on my verbose=5  CLI >, means.
>
>     -- Contact header: transport
>     -- Contact header: q
>     -- Contact header: transport
>     -- Contact header: q
>
> I'm on the latest version, 1.2.11, and am recovering from a too- 
> near lighting strike that caused damage here and there. Asterisk is  
> back up, minus a clone FXO card that the phone company said was  
> causing a short in the phone line.  SIP and IAX lines seem to work  
> normally again except for this message that pops up about once a  
> minute.
>
> Could it be a PAP2T that refreshes registration every 60 seconds?  
> If so, what's changed?
>
> Thanks._______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

This message is confidential. It may also be privileged or otherwise protected by work product immunity or other legal rules. If you have received it by mistake, please let us know by e-mail reply and delete it from your system; you may not copy this message or disclose its contents to anyone. Please send us by fax any message containing deadlines as incoming e-mails are not screened for response deadlines. The integrity and security of this message cannot be guaranteed on the Internet.