[asterisk-users] Unknown CLI output

[Carlos Leal]

OK, changed the register interval for the Linksys PAP2T to 10 times  
longer and the output described earlier on the CLI also appears to  
follow the same schedule.

I guess I'll have to check a Linksys list to see what could be  
causing this and if I should expect things to get worse.


On Aug 29, 2006, at 8:21 PM, Carlos Leal wrote:

> I'm wondering if anyone can tell me what the following output,  
> repeated about once per minute on my verbose=5  CLI >, means.
>
>     -- Contact header: transport
>     -- Contact header: q
>     -- Contact header: transport
>     -- Contact header: q
>
> I'm on the latest version, 1.2.11, and am recovering from a too- 
> near lighting strike that caused damage here and there. Asterisk is  
> back up, minus a clone FXO card that the phone company said was  
> causing a short in the phone line.  SIP and IAX lines seem to work  
> normally again except for this message that pops up about once a  
> minute.
>
> Could it be a PAP2T that refreshes registration every 60 seconds?  
> If so, what's changed?
>
> Thanks._______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>