[asterisk-users] upgrade problem on IP phone 9133i

[shadowym]

I think this is a known problem that was fixed in v1.3.

I think you need to do this upgrade using a 'put' install via tftp client
rather than trying to configure it to 'get' from a tftp server.  It's been
awhile so my memory is a bit foggy.  I used pumpKIN.
http://kin.klever.net/pumpkin/

 

-----Original Message-----
From: Jean-Louis curty [mailto:jlcurty at gmail.com] 
Sent: Wednesday, August 30, 2006 9:07 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] upgrade problem on IP phone 9133i

hi everybody,

I bought few units for evaluation but we were not able to upgrade the
firmware to 1.4 , it's currently set at 1.2, when we go to the webadmin
page, 

whether we try to change the IP of the tftp server or the firmware name and
set values, the reply is always 

Invalid IP address

Please try again

if we change the value via the phone itself , the tftp ip is changed but the
firmware does not come up ....

we are sure of our tftp server since it's used to upgrade other phones from
other brands ....

any idea ?