[asterisk-users] misdn-init.conf card parameter for a monoBRI

[Giorgio Incantalupo]

Patrick,
thank you for your help, now I installed pciutils which is what I 
couldn't find so misdn-init works!!!!
Unfortunately aftere a misdn-init start I get invalide module format errors.
I search on internet hoping to solve it.

Thanks again!

Giorgio Incantalupo


Patrick wrote:
> On Mon, 2006-08-28 at 09:08 +0200, Giorgio Incantalupo wrote:
>   
>> Hi Patrick,
>> thanks for your answer.
>> Unfortunately I cannot use misdn-init command because my distro has not 
>> the lspci command misdn-init is based on. That's why I want to bypass 
>> it. I'm doing all this mess because Debian Sarge installer does not work 
>> with new asus motherboards, so I'm trying to use the "testing Etch" version.
>> I tryed "monoBRI" as parameter but I do not know if it is the right 
>> choice for a monoBRI card.
>>     
>
> Why not use a distro that supports your motherboard? Why not just
> install pciutils manually on your box so you have lspci and the
> misdn-init script can do its job? Anyway, I don't know what card you
> have and even if I did I would not know what module it should use and
> even if I did I would not know what layermask en other misdn parameters
> to specify because that's what misdn-init scan figures out for me...
>
> Regards,
> Patrick
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>   


-- 
____________________________________________________________________

GIORGIO INCANTALUPO
Tel. +39 02 9350 4780 (104)

FG&A Software
20017 Rho - Via Puccini, 8

E-Mail :
gincantalupo at fgasoftware.com
Internet:
http://www.fgasoftware.com