[asterisk-users] Problem with a TDM400P

[Mark Muffett]

Changed it round now, FXS on 1 & 2, FXO on 3, but still the same
problem.  Any ideas for diagnostics?

On 28/08/06, Mark Muffett <mark.muffett at gmail.com> wrote:
> Never heard that - but come to think about it, all the configs I've
> seen are like that.  I'll give it a try and let you know.
>
> Thanks
>
> Mark
>
> On 28/08/06, f6hqz-m at hamwlan.net <f6hqz-m at hamwlan.net> wrote:
> > Hello Mark and the list,
> >
> > What about if you change the order of the modules, starting with FXS first
> > and finishing with FXO on the TDM400P slots ?
> > I remember to have read something like "always start with FXS if FXS and FXO
> > modules are present on the board"...
> >
> > Feedback please.
> >
> > Best Regards,
> > Francois BERGERET,
> > France.
> >
> >
> > -----Message d'origine-----
> > De : asterisk-users-bounces at lists.digium.com
> > [mailto:asterisk-users-bounces at lists.digium.com] De la part de Mark Muffett
> > Envoyé : lundi 28 août 2006 19:49
> > À : asterisk-users at lists.digium.com
> > Objet : [asterisk-users] Problem with a TDM400P
> >
> >
> > I'm setting up my first (and very simple) Asterisk PBX and running into
> > problems with the FXO module I have on a TDM400P - I'm trying to connect to
> > a standard UK, BT, POT.
> >
> > The problem is that when I plug the FXO module into a functioning BT line,
> > it seems to make the line become engaged - ie if I try to call it from
> > another number I just get the engaged tone.  This happens whether or not
> > asterisk is running and even whether or not the zaptel modules are loaded.
> >
> > The TDM400P card seems to be ok - I get the expected line:
> >
> > 04:01.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
> > interface
> >
> > when I type lspci.
> >
> > My FXO module is in position 1, with FXS modules in positions 2 and 3.  The
> > FXS modules seem to work ok with my config files (I get a dialing tone if I
> > connect a phone to them).
> >
> > My zaptel.conf file is simply:
> >
> > fxsks=1
> > fxoks=2,3
> >
> > loadzone=uk
> > defaultzone=uk
> >
> > and my zapata.conf is (at the moment):
> >
> > [channels]
> > ;
> > context=test
> > usecallerid=yes
> > hidecallerid=no
> > immediate=no
> >
> > signalling=fxo_ks
> > echocancel=yes
> > group=1
> > channel=2
> > channel=3
> >
> > signalling=fxs_ks
> > echocancel=yes
> >
> > busydetect=yes
> > answeronpolarityswitch=yes
> > hanguponpolarityswitch=yes
> > callprogress=yes
> >
> > group=2
> > channel=1
> >
> > (I've tried getting rid of busydetect, answer/hanguponpolarityswitch, and
> > callprogress individually and all together).
> >
> > Could I have a hardware fault? - if so any ideas what tests to run? Or is
> > there something else I need to configure.
> >
> > Thanks for any help.
> >
> > Mark
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>