[asterisk-users] Trunk with multiple IPs?

[Rushowr]

I wish I could offer some direct help on whether or not your method with a
comma separated list would work, but I can't. However, you could always
create a few entries using different formats and then run some tests against
them....


 

>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com 
>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
>Benjamin Lawetz
>Sent: Wednesday, August 23, 2006 9:42 AM
>To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
>Subject: RE: [asterisk-users] Trunk with multiple IPs?
>
>Still no answers huh?
>
>I've asked a couple of time how to do this, and by the lack of 
>answers, I'm guessing there is no way.
>The workaround unfortunately is to create an entry for each IP 
>address in the range (I hope you don't have to open up a whole 
>C class) 
>
>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com
>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
>Warren (mailing lists)
>Sent: August 22, 2006 3:10 PM
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>Subject: [asterisk-users] Trunk with multiple IPs?
>
>How do I enter a trunk with multiple IPs.
>
>xyz voip provider has 4 IPs and I want to allow incoming from any of
>them: 1.1.1.1, 1.1.1.2, 1.1.1.3 and 1.1.1.4
>
>Do I put 4 separate host= lines, do I put a single host=line 
>that is comma separated or do I have to set up 4 separate 
>incoming trunks?
>
>TIA,
>Warren
>
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>asterisk-users mailing list
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>asterisk-users mailing list
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>