[asterisk-users] How to reject a call without picking it up, (E1-T1-ISDN)

[Andres]

Manrique Feoli wrote:

> thanks  CF,
> I did change the PRI CAUSE  to unavailable,  or reject.
> only that it still shows  "Accepting overlap call from....." just 
> before this   ->    Executing SetVar("Zap/12-1", "PRI_CAUSE=27")
>
> does anyone knows if  this call being picked up at anytime?

Do a PRI debug from the CLI and you will know for sure if the call is 
being picked up or not.

>
> Problem is,  this is a reverse charge line with more than 3000 calls 
> per hour,  and if it telco thinks it is picked up for a milisecond 
> will charge for the whole minute.   But I can't disconnect the service 
> since it is needed during 2 hours a day on a TV show.    (that's the 
> only time when people should be calling,   but they keep calling the 
> whole day instead)
>
>


-- 
Andres
Technical Support
http://www.telesip.net