[asterisk-users] Cisco 7960 password reset

[Barry Fawthrop]

If the phone already had the SIP image running.
Check the SIPDefault.cnf file there may be a phone_password="" string 
this is the phone's current password use it
remember to change to number or uppercase if need be



Ferguson, Michael wrote:
> Maxx,
>
> Thanks much for the feedback. I will check into it and follow up with
> your instructions.
>
> 'preciate it. Best wishes.
>
>
>
>
>
>
>
>
>
>
>  
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Maxx Lobo
> Sent: Tuesday, August 15, 2006 5:48 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Cisco 7960 password reset
>
> What Cisco image is the phone running? If it is really old (lower than
> P0S030203) then yeah, this won't work.
>
> If you upgrade the phone to P0S30203 and from there on to P0S3-06-3-00,
> and then these instructions will work fine. This should be pretty
> straightforward using ATFTP and the Cisco images.
>
> In response to your other question, a factory reset TMK does not wipe
> out the SIP image. Just the settings.
>
> --Maxx
>
> Ferguson, Michael wrote:
>   
>> Maxx,
>> That did not work.
>> Any other ideas?
>>
>> Thanks
>>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com 
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Maxx 
>> Lobo
>> Sent: Tuesday, August 15, 2006 4:43 PM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] Cisco 7960 password reset
>>
>> Fastest way (wipes everything out):
>>
>> 1. Power off the phone completely.
>> 2. Hold down the # key, then power the phone on.
>> 3. Continue holding the # key until the LCD gives you a status
>>     
> message.
>   
>> 4. Follow the prompts to do a full factory reset, which resets the
>>     
> password as well.
>   
>> --Maxx
>>
>> Ferguson, Michael wrote:
>>     
>>> G'Day List,
>>>  
>>> I am trying, once again, to configure my 7960 to work with asterisk.
>>> Where abouts do I go to reset the password on the phone?
>>>  
>>> Thanks
>>>  
>>>  
>>>
>>>
>>> ---------------------------------------------------------------------
>>> -
>>> --
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation provided by Easynews.com --
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>       
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>     
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>