[asterisk-users] Polycom upgrade issue

[Dovid Bender]

I believe 468* resets the phone but dosent return it to the orig. firmware. Also try to name the files with the phones mac id and see what happens. I am doing this with 1.6.6 and its working fine.
  ----- Original Message ----- 
  From: Curt Shaffer 
  To: 'Asterisk Users Mailing List - Non-Commercial Discussion' 
  Sent: Tuesday, August 15, 2006 10:07 PM
  Subject: [asterisk-users] Polycom upgrade issue


  OK, I may have done something stupid. I was trying to upgrade my Polycom to the newest firmware I could find (1.6.7). I am also trying to get provisioning working from a central server. I tired to reset with holding 468* down and it kept the settings the phone had on the phone. >From what I understand the settings on the phone override all. So I went into reset it from the phone and choose to format the firmware. Now when I try to boot it I am getting the following in the *-boot.log

   

  0527180621|cfg  |4|00|Could not get all 512 bytes of the header.

  0527181013|cfg  |4|00|Could not get all 512 bytes of the header.

  0527181014|app1 |6|00|Error application is not present.

  0527181014|app1 |6|00|Uploading boot log, time is SAT MAY 27 18:10:14 2006

   

  I tried to put the old firmware and configs back in the directory but I get the same thing. Any help out there?

   

  Thanks!

   

  Curt



------------------------------------------------------------------------------


  _______________________________________________
  --Bandwidth and Colocation provided by Easynews.com --

  asterisk-users mailing list
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060815/dd9607e3/attachment.htm