[asterisk-users] Sangoma A101 problem

[Marcin Kwiatkowski]

Hello,

We bought Sangoma A101 card and after some troubles successfully
compiled modules (Kernel 2.4.32, wanpipe 2.3.3-3 and zaptel 1.0.8
drivers). wanpipemon can reach w1g1 interface, but asterisk (1.2.8)
not... When I'm trying to reload chan_zap so error occurs:
christine*CLI> reload chan_zap.so
    -- Reloading module 'chan_zap.so' (Zapata Telephony w/PRI)
  == Parsing '/etc/asterisk/zapata.conf': Found
Aug 10 12:17:13 WARNING[9393]: chan_zap.c:10886 setup_zap: Ignoring
switchtype
Aug 10 12:17:13 WARNING[9393]: chan_zap.c:10886 setup_zap: Ignoring
pridialplan
Aug 10 12:17:13 WARNING[9393]: chan_zap.c:10886 setup_zap: Ignoring
prilocaldialplan
Aug 10 12:17:13 WARNING[9393]: chan_zap.c:10886 setup_zap: Ignoring
signalling
Aug 10 12:17:13 ERROR[9393]: chan_zap.c:10317 setup_zap: Unable to
reconfigure channel '1-15'
Aug 10 12:17:13 WARNING[9393]: chan_zap.c:11079 reload: Reload of
chan_zap.so is unsuccessful!

Any ideas about that?

Here you have my zaptel.conf (yes, polish E1 provider uses extended
super frame):

span=1,1,0,esf,hdb3,crc4
#span=1,1,0,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31
loadzone = pl
defaultzone=pl

and here you have my zapata.conf:
[channels]
language=pl
context=from-pstn
switchtype=euroisdn
pridialplan=unknown
prilocaldialplan=unknown
signalling=pri_cpe
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no

group = 1
channel => 1-15
channel => 17-31



-- 
Marcin Kwiatkowski
System Administrator
Mob: +48 663 617 664
Fix: +48 33 819 04 60 ext. 32