[asterisk-users] Asterisk and Siemens Legacy PBX

[Jon Farmer]

James Arscott wrote:

> I also tried just using s , this again did not work. I assumed the
> ‘Extension ‘’ in context’ part of my debug meant that the siemens is not
> sending, or asterisk can’t work out, what extension is being sent.... If
> that makes sense....

It means that whatever context you have defined for the Zap span can't
find a extension with the number the siemens is dialling. Look at the
zap span config and see what context is defined and then make sure that
context has the right extenensions defined.



> Also to help me get my head around this, the ‘extension’ referred to
> that should be being sent from the siemens, is this going to be the
> number the siemens is dialing, if not, how do I get ‘access’ to that number?

Yes its the number the siemens is dialling.


> My goal is to just allow the siemens to make any call it wants via the
> span 1 on the asterisk box, which is connected to a ‘real’ ISDN PRI.

This is a everyday use for Asterisk :-)


-- 
Jon Farmer
Telford, Shropshire, UK