[asterisk-users] Asterisk and Siemens Legacy PBX

[James Arscott]

Hi, thanks I will try this tomorrow morning when the legacy PBX can be taken
Œoffline¹ for a few hours, any suggestions on specific asterisk
configuration options that I may have missed to achieve this ? I am hoping
its just the cable I am using....

Cheers

James


On 4/8/06 22:30, "Jerry Jones" <jjones at danrj.com> wrote:

> probably need a crossed t1 cable
> 
> 1-4
> 2-5
> 
> 
> On Aug 4, 2006, at 4:20 PM, James Arscott wrote:
> 
>> > Hi, this is my first post, so go easy on me !
>> >
>> > Sorry if this has been covered before, I could not find an answer that
>> > helped me.
>> >
>> > I am trying to achieve the following :
>> >
>> > Telco ISDN30e PRI <-> Asterisk with TE210P <-> Siemens HiPath PBX
>> >
>> > The siemens is a legacy PBX and I am not 100% of the modules etc
>> > inside it,
>> > it is being used in production at the moment and we have a need to
>> > put the
>> > Asterisk pbx as a gateway in between the ISDN and the Siemens.
>> > Ultimately
>> > this will help us move people from the legacy PBX to full SIP phones.
>> >
>> > We have many Asterisk PBX's working well using the TE210P + ISDN30e
>> > PRI, but
>> > I am unsure how to get the legacy PBX working with the 2nd span of the
>> > TE210P. I *assumed* that all I had to do was configure the 2nd span
>> > with
>> > pri_net and leave span 1 as pri_cpe and that would do the job, but
>> > when I do
>> > this and plug the siemens into span 2 I get a RED alarm on the span
>> > 2 and
>> > that's about it. Any tips on the most likely configuration that
>> > will work ?
>> >
>> > What configuration of CAT5 should I be using to connect the legacy
>> > PBX to
>> > span 2 ? Straight, crossed, etc.
>> >
>> > Many thanks in advanced !
>> >
>> > James
>> > _______________________________________________
>> > --Bandwidth and Colocation provided by Easynews.com --
>> >
>> > asterisk-users mailing list
>> > To UNSUBSCRIBE or update options visit:
>> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060804/76c49cae/attachment.htm