[asterisk-users] SNOM 360

[Dovid Bender]

----- Original Message ----- 
From: "Steve Davies" <davies147 at gmail.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Monday, July 31, 2006 5:57 AM
Subject: Re: [asterisk-users] SNOM 360


> On 7/28/06, Dovid Bender <asteriskusers at dovid.net> wrote:
>> Also SNOM says by Vlan to set the vlan and then the value for the qos. 
>> When
>> you set Vlan to 0 it is supposed to be no Vlan. However once I set it the
>> vlan on the SNOM to 0 and I reboot the phone is no long accessable from 
>> the
>> network and I have to reset it.
>>
>
> The "Qos" field is part of the 802.11q header, so is only available if
> a VLAN has been configured.
>
> VLAN 0 is a perfectly valid VLAN, and will cause an 802.11q packet
> header to be added to all the phone traffic. This will then only work
> if the rest of the network understands "tagged" VLAN 0 packets.
>
> Regards,
> Steve
When I set it to 0 I loose all conectivity to the phone. Cant ping it or 
anything. I have to reset it from the phone to get access to it again.