[asterisk-users] Polycom 501 : How to make it ring whenalreadyona
call
Mike
list at virtutel.ca
Thu Aug 3 08:39:15 MST 2006
Thanks. That's an ok solution. I just thought I could make the Polycom
ring normally (or even better, with decreased volume) when a new call comes
in.
Mike
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jerry Jones
Sent: August 3, 2006 11:00 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Polycom 501 : How to make it ring
whenalreadyona call
You will get a call waiting beep. One. However you can change the config
file and have multiple beeps. You can also change the beep 'sound'. However
you must also be aware that while the phone is playing the beep(s), you are
not hearing the far end of the call.
On Aug 3, 2006, at 9:21 AM, Mike wrote:
> Thanks, I know your right (I tried the second option). Problem is that
> the phone doesn`t RING. The light flashes, the as far as an audio ring
> goes, it`s completely silent.
>
> Mike
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Brian
> Vincent
> (C)
> Sent: August 2, 2006 9:48 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [asterisk-users] Polycom 501 : How to make it ring when
> alreadyona call
>
>
>> So I`m throwing this question back in the arena: Can you get the
> Polycom
>> 501 to ring when a calls comes in and the user is already on a call?
>
> Two ways:
>
> 1. Call forward the first extension in a busy condition to another
> extension registered on the phone. I use trixbox and with that it's a
> *90 and then the extension to forward to. (On the second line, send
> busy and don't answer to voicemail.)
>
> 2. You can have multiple calls to the same SIP registration using the
> Polycom config file. I believe the parameter in the extension
> registration is something like callsPerLineKey="X" where X is the
> number of calls to get to that extension.
>
> -------------------
> Brian Vincent
> Copper Mountain Telecom
> vincentb at coppercolorado.com
>
> ______________________________________________________________________
> ______
> __________________________________
>
> Confidentiality Warning: This message and any attachments are intended
> only for the use of the intended recipient(s), are confidential, and
> may be privileged. If you are not the intended recipient, you are
> hereby notified that any review, retransmission, conversion to hard
> copy, copying, circulation or other use of this message and any
> attachments is strictly prohibited. If you are not the intended
> recipient, please notify the sender immediately by return e-mail, and
> delete this message and any attachments from your system. Thank you.
> ______________________________________________________________________
> ______
> __________________________________
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list