[Asterisk-Users] newbie-too much latency

[Ryder Brook]

I have a plain POTS line coming into FXO in a Digium card, this is developers kit card with 1 FXO and 1 FXS.
 
 The latency is very high, in that, it picks up after 8 rings. I don't know what I can tune to reduce to 2 or 3 rings. If it's of any help , I am posting a section of the log : 
 ==== 
 Apr 30 10:26:50 DEBUG[3050] manager.c: Manager received command 'Command'
  Apr 30 10:28:28 VERBOSE[3051] logger.c:     -- Starting simple switch on 'Zap/4-1'
  Apr 30 10:28:32 NOTICE[3051] chan_zap.c: Got event 18 (Ring Begin)...
  Apr 30 10:28:34 NOTICE[3051] chan_zap.c: Got event 2 (Ring/Answered)...
  Apr 30 10:28:34 VERBOSE[3051] logger.c:     -- Executing Set("Zap/4-1", "FROM_DID=s") in new stack
  Apr 30 10:28:34 VERBOSE[3051] logger.c:     -- Executing Set("Zap/4-1", "FAX_RX=disabled") in new stack
  Apr 30 10:28:34 VERBOSE[3051] logger.c:     -- Executing Answer("Zap/4-1", "") in new stack
  Apr 30 10:28:34 DEBUG[3051] chan_zap.c: Took Zap/4-1 off hook
  Apr 30 10:28:34 DEBUG[3051] chan_zap.c: Enabled echo cancellation on channel 4
  Apr 30 10:28:34 DEBUG[3051] chan_zap.c: Engaged echo training on channel 4
  Apr 30 10:28:34 VERBOSE[3051] logger.c:     -- Executing PlayTones("Zap/4-1", "ring") in new stack
  Apr 30 10:28:34 DEBUG[3051] channel.c: Scheduling timer at 160 sample intervals
  Apr 30 10:28:34 VERBOSE[3051] logger.c:     -- Executing NVFaxDetect("Zap/4-1", "20") in new stack
  Apr 30 10:28:34 DEBUG[3051] app_nv_faxdetect.c: Preparing detect of fax (waitdur=20ms, sildur=1000ms, mindur=100ms, maxdur=-1ms)
  Apr 30 10:28:34 DEBUG[3051] channel.c: Generator got voice, switching to phase locked mode
  Apr 30 10:28:34 DEBUG[3051] channel.c: Scheduling timer at 0 sample intervals
  Apr 30 10:28:34 DEBUG[3051] app_nv_faxdetect.c: Start of voice token!
  Apr 30 10:28:34 DEBUG[3051] app_nv_faxdetect.c: Found unqualified token of 0 ms
  Apr 30 10:28:50 DEBUG[3050] manager.c: Manager received command 'Command'
  Apr 30 10:28:50 DEBUG[3050] manager.c: Manager received command 'Command'
  Apr 30 10:28:55 VERBOSE[3051] logger.c:     -- Executing Goto("Zap/4-1", "ivr-4|s|1") in new stack
  Apr 30 10:28:55 VERBOSE[3051] logger.c:     -- Goto (ivr-4,s,1)
  Apr 30 10:28:55 VERBOSE[3051] logger.c:     -- Executing Set("Zap/4-1", "LOOPCOUNT=0") in new stack
  Apr 30 10:28:55 VERBOSE[3051] logger.c:     -- Executing Answer("Zap/4-1", "") in new stack
  Apr 30 10:28:55 VERBOSE[3051] logger.c:     -- Executing Wait("Zap/4-1", "1") in new stack
  Apr 30 10:28:56 VERBOSE[3051] logger.c:     -- Executing Set("Zap/4-1", "TIMEOUT(digit)=10") in new stack
  Apr 30 10:28:56 VERBOSE[3051] logger.c:     -- Digit timeout set to 10
  Apr 30 10:28:56 VERBOSE[3051] logger.c:     -- Executing Set("Zap/4-1", "TIMEOUT(response)=10") in new stack
  Apr 30 10:28:56 VERBOSE[3051] logger.c:     -- Response timeout set to 10
  Apr 30 10:28:56 VERBOSE[3051] logger.c:     -- Executing BackGround("Zap/4-1", "custom/welcomeNineToFive") in new stack
 ==========
 Hope someone can help me.
 - balu
 
 
__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060430/9432d118/attachment.htm