[Asterisk-Users] PRIs from two different telco

[Gary Reuter]

I have 3 PRIs from different providers, and the fourth port is to a
legacy Meridian system...
Is it always the same PRI that does not work regardless of which port
is used on your Digium card?
I don't know if it's significant, but the order of my zaptel.conf is
different than yours:

span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
span=2,0,0,esf,b8zs
bchan=25-47
dchan=48
span=3,2,0,esf,b8zs
bchan=49-71
dchan=72
span=4,3,0,esf,b8zs
bchan=73-95
dchan=96

(Note, I do not have the echo-cancelling card.)

On 4/27/06, Wai Wu <wwu at calltrol.com> wrote:
> I just tried it. Same problem, one of the two spans is not working. If I
> load wct4xxp with vpmsupport=0, then both spans working.
>
> > > BTW, here is zaptel.conf
> > >
> > >  span=1,1,0,esf,b8zs
> > >  span=2,2,0,esf,b8zs
> > >  bchan=1-23
> > >  dchan=24
> > >  bchan=25-47
> > >  dchan=48
> > >  loadzone=us
> > >  defaultzone=us
> > >