[Asterisk-Users] PRIs from two different telco

[Steven Totaro]

Try setting the timing to zero on both spans?

> >  span=1,0,0,esf,b8zs
> >  span=2,0,0,esf,b8zs
 
 
 

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of C F
> Sent: Thursday, April 27, 2006 12:29 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] PRIs from two different telco
> 
> You should really take this up with Digium support, and don't forget
> to share your experience.
> 
> On 4/27/06, Wai Wu <wwu at calltrol.com> wrote:
> >
> > My TE411p does not seem to like to have two PRIs from different
telcos
> > (span 1 and span 2). I can get one working, but not the other.
However,
> > if I use vpmsupport=0 when loading the wct4xxp module, they both
work.
> > But here is the problem, vpmsupport=0 disables the on board echo
> > cancellation. Any ideas?
> >
> > BTW, here is zaptel.conf
> >
> >  span=1,1,0,esf,b8zs
> >  span=2,2,0,esf,b8zs
> >  bchan=1-23
> >  dchan=24
> >  bchan=25-47
> >  dchan=48
> >  loadzone=us
> >  defaultzone=us
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users