[Asterisk-Users] T1 to cross connect remote PBX and asterisk

[Damon Estep]

Looking for someone with a successful experience similar to this;

 

I have a need to cross connect a 3COM NBX PBX PRI interface to asterisk,
but over a long distance. We do not need any IP connectivity and the
solution requires G.711u audio so there is no benefit to using IP.

 

Has anyone here successfully cross connected any PBX PRI interface
expecting NI2 PRI signaling B8ZS/ESF with an asterisk box providing
PRI_Network signaling on a T1 interface card using a long haul point to
point ESF/B8ZS T1?

 

I do not need the technical details on how to set up asterisk or the
remote PBX, just need a sanity check on the idea of using the PTP T1 as
a cross connect facility. If they were local to each other I would
simply drop in a T1 crossover cable, but they are not :-)

 

Thanks!

 

 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060418/7ec7f712/attachment.htm