[Asterisk-Users] need help

[Dirgan Putra]

  hi All 
   
  I need your help , for used Digium Card TE405P, for setting this Board AS E1 ISDN PRI.
   
  1 .Current for make sure my config its rights or no I inform my configurations in Board Jumper T1/E1 is Closed is that rights or no ? for E1 i closed the Jumper.
   
   
  2. I Want To seeting E1 in ASterisk/PC  Back To Back    To Cisco E1 AS5300 Use ISDN Signaling, 
   
  my configutration :
   
  softphone --- > ASterisk TE405P  E1 --->  E1 AS5300
   
  I need your help me to rights configurations Zapata.conf and zaptel.conf
   
  FYI iam already load :
  modpobe zaptel
  modprobe wct4xxp t1e1override=15 debug=1
   
  and current /etc/zaptel.conf
  span=1,0,0,ccs,hdb3,crc4,yellow
  span=2,0,0,ccs,hdb3,crc4,yellow
  span=3,0,0,ccs,hdb3,crc4,yellow
  span=4,0,0,ccs,hdb3,crc4,yellow
   
  current i have problem error message in cisco as5300 after make a call, if used debug isdn q931
   
  in cisco AS5300 config :
   
  isdn siwtch-type primary-net5
   
  controller e1 0
  framming crc4
  linecode hdb3
  pri-group 1-31
   
   
  interface serial0:15
  isdn switch-type primary-net5
  isdn incomming-voice modem
  isdn T310 60000
   
   
  dialpeer,.....blah,...blahh
   
   
  thanks for ur help
   
  Dirgan
   

		
---------------------------------
Do you Yahoo!?
 New and Improved Yahoo! Mail - 1GB free storage!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060412/5ca19ebd/attachment.htm