[Asterisk-Users] Re: callerid name inboune from PRI

[Jerry Jones]

On Apr 10, 2006, at 12:35 PM, Steven wrote:

> Thanks for the info.
>
> I went to add the Wait(2), but am unsure where to do it.
> My context is "from-pstn".
>
> My [from-pstn] is:
> [from-pstn]
> exten => s,1,NoOp(${TIMESTAMP} PRI call in)   ;    I tried adding  
> this to see if "s" is used, but lothing was logged.
> include => from-pstn-custom                     ; create this  
> context in extensions_custom.conf to include customizations
> include => ext-did
> exten => fax,1,Wait(1)
	exten => fax,2,Goto(ext-fax,in_fax,1)
>
> My "from-pstn-custom" is non-existent and my "ext-did" is just an  
> include for "ext-local", which is my inside extensions.
>
> If I understand you correctly, I need the wait before I pick up the  
> line.
> If I change the span to immediate=yes, I can use the "s" extension,  
> but It would also answer the line early.
>
> I am drawing a blank where to put the wait.
>
> Please advise.
>
>
>
>
>
>
> -- 
> -- 
> Steven
>
> http://www.glimasoutheast.org
>
>
>
> "Alexander Lopez" <Alex.Lopez at OpSys.com> wrote in message  
> news:E918F2FD95450648B7F8C957D92D5271422822 at exmail.corp.opsys.com...
> There is nothing you really need 'to do' if your PRI is working  
> already,
> If you are able to receive and make calls your D-Channel is  
> functioning
> properly.  In the case of CallerID, some telcos provide this extra
> function via the FACILITY messages instead of the SETUP messages, If
> that is the case, you will get no Name but you will get a number. IT
> simply means that Asterisk answered the call with the SETUP message  
> but
> was unable to read in the CALLERID Name to pass on to your devices
> because it comes later on in the call via the FACILITY.
>
> Add a Wait(2) before you answer the call for your PRI, see if that
> helps.
>
>
>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steven
>> Sent: Monday, April 10, 2006 8:57 AM
>> To: asterisk-users at lists.digium.com
>> Subject: [Asterisk-Users] callerid name inboune from PRI
>>
>> I switched PRI vendors recently, and one of my questions was
>> "do you provide caller ID name in addition to number?"
>> AT&T Local did not, But XO communications said they did.
>>
>> Before I call to complain, is there an setting to turn this
>> on in asterisk?
>> I want to make sure that I have my side covered before I call XO.
>>
>> My current zaptel.conf is:
>>
>> context=from-pstn
>> switchtype=national
>> pridialplan=unknown
>> prilocaldialplan=unknown
>> priindication = outofband
>> signalling=pri_cpe
>> usecallerid=yes
>> hidecallerid=no
>> usecallingpres=yes
>> echocancel=yes
>> echocancelwhenbridged=no
>> group=0
>> callgroup=1
>> pickupgroup=1
>> accountcode=I
>> musiconhold=default
>> channel => 1-23
>>
>>
>>
>>
>> --
>> --
>> Steven
>>
>> http://www.glimasoutheast.org
>>
>>
>>
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> Asterisk-Users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users