[Asterisk-Users] Problems with registering iaxy

[Bartosz Wegrzyn - asterisk]

I solved it.
asterisk Ip needs to be binded to HA ip address.
I was using 0.0.0.0 bind ip.

>
> On 9 Apr 2006, at 06:04, Bartosz Wegrzyn - asterisk wrote:
>
>> Anyone knows hot to fix that?
>>
>> Thanks
>>
>>> I used to have my iaxy registered to my old version of asterisk.
>>> I switched to 1.2 ver and now registration fails.
>>>
>>> my config for iax.conf for that client looks like this:
>>>
>>> [user]
>>> username=user
>>> type=friend
>>> context=sip
>>> auth=plaintext
>>> secret=password
>>> host=dynamic
>>> disallow=all
>>> allow=ulaw
>>> trunk=no
>>>
>>> I provisioned my iax with this config:
>>> [root at voip iaxyprov]# cat  iaxy
>>> ;
>>> ; IAXY Provisioning description
>>> ;
>>> ;dhcp
>>> ip: 192.168.1.249
>>> netmask: 255.255.255.0
>>> gateway: 192.168.1.251
>>> codec: ulaw
>>> ;codec: adpcm
>>> server: 192.168.1.251
>>> ;altserver: 192.168.0.2
>>> user: user
>>> pass: password
>>>
>>>
>>> When I do iax2 debug
>>>
>>> I see this:
>>>
>>> IAX2 Debugging Enabled
>>> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type: IAX
>>> Subclass:
>>> REGREQ
>>>    Timestamp: 00002ms  SCall: 12640  DCall: 00000
>>> [192.168.1.249:4569]
>>>    USERNAME        : user
>>>    REFRESH         : 60
>>>    DEVICE TYPE     : iaxy2
>>>    SERVICE IDENT   : 0003640005a8
>>>    PROVISIONG VER  : 3503263220
>>> voip*CLI>
>>> Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX
>>> Subclass:
>>> REGAUTH
>>>    Timestamp: 00012ms  SCall: 00011  DCall: 12640
>>> [192.168.1.249:4569]
>>>    AUTHMETHODS     : 1
>>>    USERNAME        : user
>>> voip*CLI>
>>> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX
>>> Subclass:
>>> INVAL
>>>    Timestamp: 00000ms  SCall: 12640  DCall: 00011
>>> [192.168.1.249:4569]
>>> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type: IAX
>>> Subclass:
>>> REGREQ
>>>    Timestamp: 00002ms  SCall: 08797  DCall: 00000
>>> [192.168.1.249:4569]
>>>    USERNAME        : user
>>>    REFRESH         : 60
>>>    DEVICE TYPE     : iaxy2
>>>    SERVICE IDENT   : 0003640005a8
>>>    PROVISIONG VER  : 3503263220
>>>
>>>
>>> Any ideas what is wrong?
>>> Does new asterisk differs in the iax2 registration?
>>>
>>> Thanks
>>>
>>> Bart
>
>
> I don't have an IAXy, so I can't be sure, but it looks like your's is
> rejecting asterisk's REGAUTH
> message.
>
> The REGAUTH has
>   AUTHMETHODS     : 1
>   USERNAME        : user
>
> So I'm guessing that it doesn't like the AUTHMETHOD - plaintext.
> try setting it to MD5 in iax.conf, it is good policy anyhow not to
> send plaintext passwords.
>
>
>
>
>
> Tim Panton
> tim at mexuar.com
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>