[Asterisk-Users] oh323.conf problem

[Yusuf]

> I have installed oh323 channel driver (finaly! :)). I head some problem
> starting * so I have put the smallest possible oh323.conf file to se what
> happens. When I don't put available codec's in oh323.conf (*1) Asterisk
> starts but he also disables h323 channel because there are no available
> codec's (*2).
>
> When I put codec (*3) Asterisk doesn't start (*4).
>
> What have I done wrong? I have tested several codec's with several frames,
> but I haven't find combination that works.
>
> I'm using Asterisk-1.2.6, pwlib_Mimas_patch2, openh323_Mimas_patch2 and
> asterisk-oh323-0.7.3 channel driver.
>
> Below is the conf file and CLI output.
>
> --
>
> Tomislav Parcina
>
>
>
> *1
> Oh323.conf
> [general]
> listenAddress=0.0.0.0
> listenPort=1720
> outboundMax=100
> inboundMax=100
> simultaneousMax=100
> context=sip
>
> [register]
> alias=asterisk
> alias=123
>
> [codecs]
> ; no codec defined
>
> *2
> == Parsing '/etc/asterisk/oh323.conf': Found
> Apr 9 10:37:57 WARNING[4015]: chan_oh323.c:5008 reload_config: Category
> [codecs
> ] not present in configuration file (oh323.conf).
> Apr 9 10:37:57 NOTICE[4015]: chan_oh323.c:5227 load_module: No codecs
> configure
> d! Disabling H.323 channel driver.
>
> *3
> [general]
> listenAddress=0.0.0.0
> listenPort=1720
> outboundMax=100
> inboundMax=100
> simultaneousMax=100
> context=sip
>
> [register]
> alias=asterisk
> alias=123
>
> [codecs]
> codec=G711A
> frames=20
>
> *4
> [chan_oh323.so] => (InAccess Networks OpenH323 Channel Driver)
> == Parsing '/etc/asterisk/rtp.conf': Found
> == Parsing '/etc/asterisk/oh323.conf': Found
> Illegal instruction
> [root at pbx83 ~]#
>

Hi,

I have had the exact same problem last week.  I have not yet solved it. 
So instead I am using ooh323, but would prefer to use oh323.  Can anyone
help?

thanks,
yusuf


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.