[Asterisk-Users] Re: Hangupcause is not enough on PRI

[Tomislav Parčina]

In article <20060404124728.CD2FBC830 at lists.digium.com>, asterisk at pibix.cl says...
> Hi,
> 
> I'm using Asterisk and a TE110P E1 PRI in Chile.
> 
> When I call to a disconnected number or any not operational number, the
> telco sends the Hangupcause disconnection code and an audio message
> notifying the disconnection cause to the user.
> 
> Asterisk does not allow the user to hear the audio message form the telco,
> instead it cuts the call. Any other legacies PRI PBX I've tested allow the
> user to hear the audio message from the telco.
> 
> A few months ago I was dealing with this problem (making the user hear the
> disconnection cause message from the telco) and someone suggested using the
> Hangupcause code
> (http://lists.digium.com/pipermail/asterisk-users/2005-December/133374.html)
> , and it solved the problem momentarily. Now, when I call to a not
> operational number, depending on the Hangupcause variable, Asterisk plays an
> internal audio message notifying the user about the disconnection cause, but
> my client is not satisfied with that, he expect to hear the real audio
> messager form the telco.
> 
>  
> 
> I would like to know if somebody solved this issue letting the user hear the
> real disconnection cause message form the telco.

Hi Javier!

I have a same problem in Croatia with Optima provider. Please, if you find the solution, mail it to the group.


--
Tomislav Parcina
tparcina#lama.hr