[Asterisk-Users] Hangupcause is not enough on PRI

[Wai Wu]

Interesting about your tellco. A the tellco I have dealt with sent the
DISCONNECT message when a non-operational number is called. The usual
messages will come in the this order

1. proceeding 
2. one or more progressing
3. disconnect with the cause value(if number is non-operational, or the
network or destination is busy)

On the other hand, upon receiving disconnect from tellco, Asterisk does
not really need to disconnect right away if listening to the telco
message is desired. (there might be a switch you can set for this).

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Andrew
Kohlsmith
Sent: Tuesday, April 04, 2006 9:08 AM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Hangupcause is not enough on PRI

On Tuesday 04 April 2006 08:47, Pibix wrote:
> Asterisk does not allow the user to hear the audio message form the 
> telco, instead it cuts the call. Any other legacies PRI PBX I've 
> tested allow the user to hear the audio message from the telco.

Can we see a pri debug trace for a call that does this?  I think this
might be more of a signaling issue, as my T1 PRI (Bell Canada) does not
do this at all.  Asterisk doesn't disconnect the call until it
encounters something that issues a Hangup(), or the telco sends the
DISCONNECT message.

-A.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users