[Asterisk-Users] chan_zap.so ?

[Mojo with Horan & Company, LLC]

On reboot I must run:

modprobe wctdm

_twice_ (the first time provides error about not finding hardware) before

ztcfg -vv

can run properly, setting up the zap hardware right where asterisk wants 
it.. On you system the command of course would be:

modprobe wcfxo

I hope this is your problem :)

So try:
modprobe wcfxo;modprobe wcfxo && ztcfg -vv && asterisk;asterisk -r



Andrew Kohlsmith wrote:
> On Friday 30 September 2005 10:26, cyril SIMON wrote:
> 
>>I've a little problem with my asterisk server.
> 
> 
> Yes, it is a little problem.
> 
> 
>>Today, I wanted to restart it and when I did it, my
>>asterisk server didn't want to start again.
> 
> 
> It's telling you the problem pretty damn clearly:
> 
> 
>>Sep 30 16:51:53 WARNING[2343]: chan_zap.c:816 zt_open:
>>Unable to specify channel 1: No such device or address
> 
> 
> It can't find the zaptel hardware.  There are a few causes for this:
> 
> 1) You took the hardware out
> 2) You changed the configuration of the hardware
> 3) You didn't load the drivers for the hardware
> 
> 
>>I really do not know that can be the problem.
> 
> 
> Please review the potential causes above and report back.  I'm curious as to 
> what the actual problem was.  We can only improve our ability to help if you 
> provide good feedback.
> 
> -A.
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 

-- 
Mojo <mojo at horanappraisals.com>
Office Manger, Horan & Company, LLC
(907) 747-6666 x112